Description	Heidelberg Part Number	Qty available	Condition	Price
MOE Main drive belt 37x10x1250	00.270.0064	2	New	135.00
Poly V Belt L1715-15	00.270.0075	1	New	125.00		Welcome to the Press Parts clearance list, this list can be searched via Heidelberg part number or description.
Feeler Gauge (cold rolled strip) 0.3 x 25mm 5M	00.341.0089	1	New	10.00
Feeler Gauge (cold rolled strip) 0.4 x 25mm 5M	00.341.0090	1	New	10.00
Taper Pin	00.500.0044	2	New	4.00		To run a search just use the built in search function, ctrl+f on a PC or CMD+f on MAC
Taper pin 6 x 36	00.500.0061	1	New	5.00
Screw countersunk M3x10 socket head	00.500.0271	8	New	1.00
Straight pin 6x30mm	00.500.0412	6	New	3.00		If you need any assistance at all, or to place an order for any of these parts contact us via Email:
Straight pin 5x30mm	00.500.0497	1	New	3.00
Split pin 1x10	00.500.0587	20	New	0.50
Screw countersunk M5x10 PH	00.500.0620	1	New	1.00		[email protected] or on Phone: +44 (0)20 8502 3059
Washer 5mm	00.510.0003	4	New	0.50
Washer 6mm	00.510.0004	3	New	0.50
Washer	00.510.0007	2	New	1.00
spring washer	00.510.0028	2	New	0.50
Grub screw for suction disk M6x12	00.510.0498	34	New	1.50
102 coater metering roller bearing	00.520.0144	1	New	45.00
Bolt for SM52 number shaft	00.520.0258	3	New	2.50
Ball bearing 6000-2Z	00.520.0525	6	New	5.00
Ball bearing 3206-A	00.520.0664	1	New	45.00
Square nuts	00.520.0724	12	New	1.00
Washer	00.520.1086	4	New	0.50
Ball bearing 6200-2RS	00.520.1116	5	New	25.00
Ball bearing 6210-2RS	00.520.1198	2	New	35.00
Numbering transfer bearing 607-2RS	00.520.1255	2	New	8.00
Countersunk rivet	00.520.1265	2	New	1.00
Numbering unit oscillating cam follower	00.520.1309	2	New	14.00
Hex screw M5x6	00.520.1620	4	New	1.00
Ball bearing 6208-2RS	00.520.1725	1	New	20.00
Circlip 17x1 with tabs	00.520.1781	2	New	0.50
Ball bearing 623-2Z	00.520.2151	32	New	1.50
Ball bearing 61904-2RS	00.520.2199	9	New	16.00
Grub screw M8x70	00.520.2227	3	New	5.00
Grub screw M8x12 dog end	00.520.2412	4	New	1.00
Grub screw M8x45	00.520.2539	2	New	5.00
Ball bearing 61800-2RS	00.520.2577	7	New	8.00
Split pin 1.5x12	00.530.0242	13	New	1.00
Split pin 3x40 plus	00.530.0259	1	New	2.00
Bronze bush 7x10x8	00.530.0673	1	New	4.00
Bronze bush 7x10x12	00.530.0733	1	New	4.00
Bronze Bearing 35x44x28		2	New	6.50
Glacier bush 20x20	00.530.1109	1	New	4.00
Ball 6mm	00.540.0008	18	New	0.50
Tapered pin 5 x 40 Geh	00.540.0081	8	New	2.00
low profile c/head screw M6x18	00.540.0149	17	New	0.80
Hex nut M8	00.540.0232	4	New	0.50
Chain joining link 12B	00.540.0584	7	New	2.00
Countersunk screw M5x14	00.540.0837	4	New	0.50
Elbow for blower 32mm	00.540.0960	2	New	4.00
Shallow cap head M5x6	00.540.0686	4	New	1.00
Allen screw M5x40	00.540.1045	18	New	2.00
Allen screw M4x25	00.540.1356	6	New	1.00
Straight pin 8x45mm	00.540.1418	1	New	2.00
Straight pin 6x24mm	00.540.1528	2	New	2.00
SM74 feeder chain Syno 66 link	00.540.1634	1	New	60.00
Needle bearing HK1010-OH	00.550.0001	0	New	6.00
Needle bearing HK15/12-OH	00.550.0004	26	New	6.50
Needle bearing HK15/16	00.550.0005	1	New	6.40
Needle bearing HK16/12	00.550.0006	3	New	6.40
Needle bearing HK2020C	00.550.0009	8	New	8.00
Needle bearing HK22/16	00.550.0010	4	New	8.00
Needle bearing NK16/20	00.550.0030	4	New	15.00
Needle bearing JNS NK18/16	00.550.0032	3	New	15.00
Needle bearing NK25/16-ASR1 (CDSM74 Heavy)	00.550.0038	20	New	20.00
Segment gear needle bearing NK32/20	00.550.0042	5	New	16.00
Needle bearing HK1616	00.550.0059	1	New	8.00
Needle bearing HK1622	00.550.0067	2	New	4.00
Needle bearing HK0810 OH	00.550.0076	2	New	5.00
Needle bearing HK0609 OH	00.550.0102	14	New	3.00
Axial bearing disc	00.550.0168	2	New	12.00
Axial bearing AXK 3552	00.550.0195	1	New	8.00
Oil seal 30 x 40 x 4	00.550.0203	2	New	3.00
Axial bearing disc AS 3047	00.550.0228	6	New	2.00
Cam follower KR26	00.550.0231	5	New	28.00
Axial bearing AXK 5578	00.550.0247	5	New	12.00
Axial bearing disc AS 3552	00.550.0259	5	New	2.00
SM102/72 Cam follower Impression/transfer/storage	00.550.0322	4	New	60.00
Axial bearing disk GS 8111	00.550.0390	2	New	8.00
Needle bearing HK1522-AS1	00.550.0407	2	New	4.00
Needle bearing HK25/16-AS1	00.550.0410	9	New	10.28
Needle bearing NK8/12	00.550.0420	2	New	6.55
Snap ring 42mm	00.550.0417	5	New	2.00
GTO/MO cam follower F-52048.1	00.550.0436	2	New	55.00
GTO/MO cam follower import	00.550.0436	5	New	15.00
Needle bearing HK1816 2RS	00.550.0442	5	New	15.00
102 Transfer gripper/S line ranger F-53272	00.550.0462	7	New	55.00
Segment gear axial bearing AXK 3047	00.550.0464	2	New	8.00
Flat cage FF-2515	00.550.0477	11	New	6.00
Needle bearing HK2212 OH	00.550.0512	32	New	6.00
Inner ring 28x32x30	00.550.0571	2	New	12.00
GTO numbering shaft end bearing	00.550.0611	1	New	35.00
Needle bearing NKI28/20	00.550.0612	2	New	28.00
SM102 Blanket wash cam followers F-64986.1	00.550.0670	1	New	45.00
102 delivery gripper opening roller	00.550.0675	2	New	26.00
QM46 ink duct clutch bearing HF1616	00.550.0732	1	New	22.00
Needle cage K72x79x45	00.550.0788	2	New	85.00
HK 20/20 2RS	00.550.0938	4	New	10.00
HK12/16 2RS	00.550.1021	6	New	8.00
Ball bearing LR606NPPU	00.550.1022	4	New	12.00
Cam follower F-207624 22x18x47.5	00.550.1071	2	S/Hand	10.00
Needle bearing HKJA5904	00.550.1104	1	New	20.00
Cam follower KRE 16 PP	00.550.1240	2	New	15.00
CD102 Needle cage F-209751.K	00.550.1413	2	New	98.00
Cam follower F217813.2	00.550.1471	6	New	70.00
Cam follower F-222190	00.550.1505	1	New	75.00
Retainer ring 18mm	00.550.1749	4	New	0.50
SM74 pull roll F-227926	00.550.1808	1	New	65.00
Needle bearing NK 28/30	00.550.1883	1	New	20.00
Cam follower KR22	00.550.1892	2	New	35.00
Cam follower F-217813.4 28x10x49	00.550.2128	1	New	45.00
Lubrication free bushing 8 x 10	00.508.0097	12	New	4.00
Shaft seal hickey remover	00.580.0189	12	New	4.00
GTO fount pan drain tap	00.580.0269	2	New	18.00
Lubrication free bushing 12x6	00.580.0288	10	New	3.00
Grey hole plug 30mm	00.580.0567	9	New	1.50
Lubrication free bushing 16 x 20	00.580.0662	1	New	4.00
SM102/72 clutch collar BOWEX	00.580.0687	1	New	4.00
Clutch half BOWEX	00.580.0688	1	S/Hand	4.00
Knurled knob M6 x 15	00.580.0695	5	New	2.00
Knurled knob M6 x 25	00.580.0696	4	New	2.00
Bearing disc DU 8x18.5x1.49	00.580.0782	2	New	8.00
Lubrication free bushing 18 x 15	00.580.0794	19	New	4.00
Lubrication free bushing 23 x 15	00.580.0796	1	New	4.00
Lubrication free bushing 20 x 20	00.580.0798	2	New	4.00
Lubrication free bushing 14 x 12	00.580.0825	12	New	4.00
Lubrication free bushing 16 x 15	00.580.0827	2	New	4.00
Revolving handle 26xM10	00.580.0859	2	New	15.00
Forkhead 8 x 16	00.580.1094	5	New	5.00
Handle M6	00.580.1118	1	S/Hand	5.00
Handle M10 x 65	00.580.1342	1	New	6.00
Push knob	00.580.1347	2	New	6.00
Swivel backplate (PP3682)	00.580.1464	0	New	42.00
Bowex coupling M24 x 20 damper motor	00.580.1484	1	S/Hand	15.00
Bowex coupling M24 x 17 damper shaft	00.580.1591	1	New	25.00
Bowex coupling M24 x 17 damper shaft	00.580.1591	2	S/Hand	15.00
Ball retainer M5	00.580.1710	1	New	6.00
SM72 Handwheel scale	00.580.2019	2	S/Hand	20.00
Rubber cap for air lever	00.580.2072	8	New	1.50
Toothed Belt 16T10/1480PAZ	00.580.2183	2	New	48.00
SM102 Inner chain link	00.580.2613	13	New	8.00
M6 wing screw	00.580.2821	1	New	4.00
MO Air Cylinder 25x25mm stroke recon exchange	00.580.2836	2	S/Hand	90.00
102/74 sidelay piston exchange	00.580.2900	1	S/Hand	115.00
SM102 delivery air cylinder recon exchange	00.580.3003	2	S/Hand	170.00
Knurled knob M6 x 20	00.580.3046	2	New	2.00
Retention piece	00.580.3067	5	New	2.00
SM102 Blanket Wash air cylinder OS	00.580.3125	1	New	130.00
Union Joint 1/4BSP	00.580.3144	5	New	9.50
Short stoke air cylinder 20 x 5mm stroke recon exchange	00.580.3273	1	S/hand	65.00
Forkhead clevis 6 x 12	00.580.3279	4	New	7.50
SM102 Blanket Wash air cylinder OS PP287	00.580.3371	1	New	130.00
Air cylinder 20 x 25 stroke	00.580.3367	2	S/Hand	70.00
Air cylinder 20 stroke recon exchange	00.580.3369	1	S/Hand	70.00
Air cylinder 25 stroke	00.580.3387	3	New	110.00
SM102 Z roller Bowex coupler	00.580.3502	4	New	25.00
Short stroke cylinder exchange	00.580.3533	7	S/Hand	95.00
Air Cylinder ( Exchange)	00.580.3909	1	New	90.00
Air Mainainence unit	00.580.3913/A	1	New	120.00
Air Cylinder 25x25mm stroke	00.580.4127	4	Recon	90.00
102/72 inker cylinder recon	00.580.4275	1	S/Hand	80.00
SM74 form roller switching air cylinder reconditioned exchange	00.580.4300	2	S/Hand	130.00
Grey hole plug 22mm (for lifting holes)	00.580.4367	12	New	1.00
Dowel screw M6 8x16 Varn bolt 091722	00.580.4438	8	New	4.00
SM74 infeed guard handle	00.580.4526	1	New	26.00
Air Cylinder for perfector dia32 x 40 stroke recon exchange	00.580.4505	1	S/Hand	120.00
SM52 O ring for filter case 00.580.4991	00.580.4536	8	New	2.00
Hose clamp	00.580.4542	13	New	3.00
Air cylinder 32mm x 25 stroke	00.580.4546	1	S/Hand	50.00
Air cylinder 40mm x 40 stroke recon exchange	00.580.4564	0	S/Hand	160.00
Short stroke air cyl 32mm x 10 stroke exchange	00.580.4615	1	New	180.00
Short stroke air cyl 32mm x 10 stroke recon exchange	00.580.4615	0	S/Hand	150.00
QM46DI air cyl cylinder switching exchange	00.580.4625	1	New	260.00
SM74 jogger spring	00.580.4791	1	New	8.00
O ring 13x2 (PP976)	00.580.4913	199	New	1.00
Main motor floor fixing bolts (set 4 M16)	00.580.4961	1	New	40.00
SM102 deliver side guard	00.580.4967	2	New	35.00
O ring 20x3.5 for water cooled distributor	00.580.4998	100	New	1.00
Pneumatic T coupling 4x4x6	00.580.5291	2	New	4.00
O rings	00.580.5481	2	New	2.00
CD102 Manometer 10-250mbar	00.580.5484	2	New	35.00
Dowel screw M6 8x25	00.580.5511	2	New	5.00
Stabilus Gas spring 084352 400N length 365mm	00.580.5919	9	New	15.00
Toothed belt S8M2048	00.580.6009	4	New	85.00
O ring 45.69 x 2.62	00.580.6312	2	New	1.00
Lateral sheet separation blower hose	00.580.6441	1	S/Hand	15.00
Antifreeze 10lt	00.580.6786	1	New	35.00
Self locking nut	00.580.7055	12	New	0.75
XL75 delivery sheet slowdown drive belt	00.580.9630	1	New	35.00
102 pressing bar BV.007.7898 rental only	00.894.1075	1	S/Hand	75.00
Compression spring	01.001.009	6	New	4.00
Oil filter screen	01.001.083	5	New	10.00
Pin	01.006.082	1	New	6.00
Compression spring	01.012.012	10	New	2.00
Hinge bolt and roller (roller 01.002.061)	01.013.010	1	New	60.00
Connecting piece	01.016.016	1	New	12.00
Spiral Hose ID14	01.018.018	2	New	8.00
Leaf spring and pin	01.022.016	1	New	20.00
Leaf spring and pin secondhand	01.022.016	1	S/Hand	10.00
Holder complete GTO 46/52	01.022.019F	1	New	25.00
Holder complete GTO 46/52	01.022.019F	3	S/Hand	12.00
Powder spray adjust packing ring	01.232.013	1	New	2.00
Gripper with carbide tip similar to C3.011.627	03.011.027F	4	New	30.00
Compression spring	03.012.062	14	New	1.00
Sheet steadier	03.017.030F	9	S/Hand	5.00
S cylinder sheet separators 45 degree	03.017.083	16	New	7.50
SM/S-line narrow sheet smoother plate spring	03.022.038	1	New	1.84
T-handle socket wrench 19mm	03.024.006	1	S/Hand	22.00
Brake lining with rivets MV.018.073	04.004.049	4	New	35.00
Compression spring	04.010.044	4	New	1.00
KORD Front roller bearing guide block latch assy	04.010.046	1	New	16.45
KORD front roller bearing guide block DS	04.010.045/K01	2	New	66.00
KORD front roller bearing guide block OS	04.010.047	2	New	66.00
KORD front roller journal block	04.010.048/K01	2	S/Hand	20.00
Retainer spring	04.013.102	43	New	1.60
GTO46/52 Front lay	04.013.103	4	New	21.95
KORD delivery table cable	04.015.039	8	New	30.25
KORD/GTO46 sheet separators 90 degree	04.017.084	57	New	3.50
KORD/GTO46 sheet separators 45 degree with foam	04.017.085F	9	New	4.50
Rubber hose 250mm	04.018.008	2	New	4.00
Hose tap with sleeve 71.718.009 MV.018.214	04.018.021	1	New	30.00
KORD feedboard gripper complete	04.020.030	1	New	350.00
K line gripper	04.020.035	4	New	9.00
Washer	04.020.055	2	New	3.00
Side lay	04.022.028	1	S/Hand	45.00
GTO/KORD sheet brake	04.022.036F	8	S/Hand	25.00
KORD sheet smoother leaf spring	04.022.038	2	New	5.00
Sheet steady brush and holder	04.022.069	2	S/Hand	20.00
Standard grease gun	04.024.061	1	S/Hand	10.00
Torsion spring	07.013.087	1	New	7.00
Compression spring	07.405.115	10	New	2.00
KORD damping ductor roller brake	08.008.015	4	New	11.83
KORD damping trough support bracket	08.010.102	4	New	7.54
KORD Bearing for water trough roller	08.010.104	12	New	4.50
KORD damp distributor cam gear	08.010.342	7	New	25.00
KORD roller extension spring	08.010.356	4	New	20.00
KORD safety selector lever	08.010.361	2	New	32.40
KORD impression gripper hard metal tip	08.011.027	12	New	35.00
Mechanical sheet counter IVO	08.012.125	1	New	330.00
KORD Water bottle stand	08.230.002	1	New	80.00
SM102 Blanket bar (pair)	09.006.035	1	New	460.00
T-handle socket wrench 17mm for blanket	09.024.001	1	S/Hand	22.00
102 QA Plate clamp tool	09.457.015	2	New	23.00
Blanket Cylinder measuring Gauge 3 dial	09.465.001F	1	New	700.00
Blanket Cylinder measuring Gauge 3 dial	09.465.001F	3	S/Hand	550.00
Plate with Handle	10.104.8099	1	S/Hand	30.00
Scale for coater clamps c/w 00.510.0441 and 00.580.1134	10.106.4099	14	New	7.00
Button plate 102 inter unit OS	10.107.1499/01	1	New	20.00
Speedmaster product badge	10.111.5499	3	New	48.00
KORD 62 Starwheel Rod	14.014.011F/B	1	New	42.85
K/S starwheels	14.014.013	3	S/Hand	2.00
Gripper hex shoulder bolt	14.014.043	9	S/Hand	1.00
KORD sheet separator stick	14.017.083	1	S/Hand	4.00
GTO/KORD spray powder nozzle 2 hole	14.232.021	1	New	23.10
GTO/KORD spray powder nozzle 2 hole	14.232.022	3	S/Hand	12.00
Guide plate collar for powder tube MV.018.707	14.232.028	2	New	9.50
TOK delivery gripper bar	22.014.001	1	New	320.00
TOK delivery gripper fingers	22.014.005	10	New	8.57
Compression spring	22.014.514	2	New	2.00
TOK fount container valve	22.030.072	1	New	45.00
Washer	22.040.152	2	New	0.60
Extension spring	22.040.573	1	New	4.00
Bearing bolt	23.010.064	2	New	22.00
Compression spring for GTO/SM52	24.010.070	6	New	4.00
Gripper bolt low head	27.011.033	0	New	2.00
Ranger drum roller lever	27.013.030	1	New	65.00
Washer	27.013.053	1	New	1.00
Driver Spacer	32.056.082	3	New	5.00
T Handle Socket Wrench 13mm	34.024.006	1	S/Hand	15.00
Knurled nut	34.713.002	4	New	4.00
Cam follower F-42446.1 25x10x31.8	36.010.151	1	New	28.00
Sprocket wheel	36.014.103	1	New	20.00
Lost sheet pincer tool	36.024.056	2	S/Hand	20.00
Gripper bolt M8 x 15	38.011.033	2	New	4.00
KORD64 delivery gripper rconditioned	38.014.003F/02	3	S/Hand	370.00
KORD 64 delivery pile front plate	38.015.094F/02	1	New	27.45
SM102 blanket cylinder pin C8.206.700	41.006.009	10	New	20.00
SM74/102 blanket claw flat style	41.006.234	14	New	18.00
102 blanket clamp shaft support	41.006.801	20	New	8.00
SM102 rider	41.009.911	3	S/Hand	20.00
SM102/72 roller support set MV.019.362	41.010.408	4	New	45.00
SM102 Z roller journal end sleeve hex head MV.025.260	41.010.417	1	New	115.00
SM102 Z roller journal end sleeve barrel type MV.032.569	41.010.418	3	New	115.00
SM102 Z roller journal end sleeve screw type MV.032.569/01	41.010.418	4	New	115.00
Z roller adjusting screw set MV.019.363	41.010.419	4	New	45.00
Z roller adjusting screw pan head	41.010.419/01	1	New	25.00
102/72/S pile guide switching tongue (later)	41.017.320	5	New	25.00
Feeder rotary valve air connection piece	41.028.316	1	New	190.00
SM74/MO forwarding sucker OS Reconditioned	41.028.046	1	S/Hand	100.00
SM74/MO forwarding sucker DS Reconditioned	41.028.056	3	S/Hand	100.00
SM102 Matt chrome distributor with journals exchange	41.030.425F	0	New	650.00
SM102 Matt chrome distributor exchange	41.030.425		New	500.00
Boge compressor con rod	41.102.2011	1	New	55.00
Blanket tension bracket	42.006.027	2	New	35.00
Brass washer	42.006.030	3	New	1.00
GTO plate clamp threaded bush	42.007.026	2	New	16.50
PM52GTO Ink duct overrunning clutch	42.008.021	2	New	65.00
GTO Inker journal No 3 roller DS, No2 OS MV.022.810	42.010.025	3	New	125.00
GTO Inker journal No 3 roller OS late type MV.022.811	42.010.025/04	2	New	145.00
GTO Inker journal No4 roller DS	42.010.028	1	New	125.00
GTO Inker journal No4 roller OS	42.010.029	1	New	125.00
GTO square head screw	42.011.003	6	New	4.00
GTO cogs	42.011.009	6	New	8.00
GTO numbering gear drive bush	42.012.082	1	New	55.00
Pin	42.013.013	2	New	2.00
GTO46 transfer gripper wireform spring	42.013.026	1	New	60.00
Rod Head MV.001.395	42.013.028	1	New	15.00
GTO delivery cam pin	42.014.043	2	New	6.00
GTO paper support disc	42.014.112	30	S/Hand	3.00
GTO delivery chain sprocket pin	42.014.123	1	New	12.00
Bevel gear	42.015.110	2	New	37.00
GTO Tissue paper spreader	42.016.069	2	S/Hand	10.00
GTO Feed table support pin	42.017.054	2	New	2.50
GTO Feed table crank handle	42.017.057	1	S/Hand	55.00
GTO46 Sheet separator stick	42.017.083	35	New	3.08
GTO46 side separator holder	42.017.085	2	S/Hand	10.00
GTO feed gripper complete	42.020.030F	1	New	250.00
GTO46 sheet smoother	42.022.024F	2	S/Hand	30.00
GTO Roller lever complete	42.022.126	1	New	350.00
Water container bucket	42.024.015	1	New	12.00
GTO damper lever bearing DS	42.030.001	1	New	30.00
GTO52/46 Lower Damper Journal (pair)	42.030.005/006	1	S/Hand	150.00
GTO46 Lower Damper Journal (pair) Small hole		1	New	120.00
Washer 15x6x2	42.030.038	4	New	1.00
GTO damper pan handle	42.030.348	1	New	120.00
GTO Damping fount bottle	42.030.367F	0	New	190.00
	42.030.367F	0	S/Hand	80.00
GTO sheet support small sizes	42.209.008F	4	S/Hand	26.00
GTO Powder spray device MV.019.872	42.232.000	1	New	550.00
GTO Powder spray container and guide tube	42.232.000	1	S/Hand	190.00
Brass washer	42.431.031	10	New	3.00
Numbering control shaft distance washer	42.431.063	2	New	15.00
GTO numbering ink duct clamp screw	42.431.120	2	New	20.00
GTO numbering duct key	42.431.123	5	S/Hand	10.00
Numbering unit pull rod	42.431.137	1	New	65.00
Numbering unit ink adjust spindle	42.431.142	1	New	20.00
Numbering unit ink duct clutch complete MV.003.208	42.431.149	1	New	190.00
Tension spring	42.431.158	10	New	3.00
GTO numbering DS gear	42.431.166	3	New	30.00
GTO numbering DS gear	42.431.179	5	New	30.00
GTO carboard feed guide strap	42.508.001	2	S/Hand	38.00
GTO46 pressing bar	42.581.040	1	S/Hand	95.00
GTO A4 side lay DS	42.707.001	1	S/Hand	40.00
GTO A4 side lay OS	42.707.002	3	S/Hand	40.00
GTO sheet guide support DS	42.731.502	1	S/Hand	35.00
GTO sheet guide support OS	42.731.503	1	S/Hand	35.00
GTO card control leaf spring	42.731.508	7	New	20.00
GTO paper control leaf spring	42.731.509	0	S/Hand	19.00
Control knob indicator plate pile height	42.74	1	New	6.00
MO blanket bar (pair)	43.006.002	1	S/Hand	250.00
MO ink duct clutch grease coupling bottom side recon exchange	43.008.005/03	1	S/Hand	155.00
MO ink duct end block manual (PP778)	43.008.021	3	New	40.00
MO yellow journal DS4/OS1	43.010.033	2	New	160.00
MO yellow journal DS4/OS1 reconditioned	43.010.033	1	S/Hand	80.00
MO form roller adjusters	43.010.037	2	New	30.00
Roller oscillation drive nut	43.010.111	3	New	8.00
MO impression jacket bar	43.011.006F	1	S/Hand	200.00
MO Ranger drum pad bar older style	43.013.020	1	New	170.00
MO delivery gripper bar	43.014.003	1	S/Hand	980.00
MO delivery chain set low pile	43.014.015		New	330.00
MO Front lay guide and stop	43.022.111	8	New	30.00
MO bottom damper journal O.S.	43.030.002F	1	New	240.00
MO bottom damper journal D.S.	43.030.003F	1	New	240.00
Compression spring	44.010.253	5	New	3.00
102 delivery gripper opening roller pin	47.005.024	5	New	4.00
Delivery gripper bushes	47.014.011	4	New	3.00
Antimarking starwheel roller	49.006.544	1	New	10.00
GTO52 short sheet smoother	52.022.046F	1	S/Hand	20.00
GTO52 Damper spring rod	52.030.017	2	New	45.00
GTO spray powder link	52.459.006	2	New	12.00
GTO/MO reversing drum changover casting	52.580.285	1	New	70.00
Knurled knob	52.580.325	1	New	5.00
GTO/MO hook gripper holder	52.581.028	10	New	28.00
Perfecting indicator plate	53.580.254	1	New	15.00
SM74 turning valve complete	53.580.256	1	New	450.00
Feed frame connecting piece	55.020.037	2	New	25.00
SM gripper pad parallel grooves	58.011.020	7	New	15.00
SORM medium smoother for carton	58.022.384F	1	New	25.00
SORM medium smoother for paper	58.022.396	1	S/Hand	18.00
SM102/72 Gripper pads cross cut (20mm)	58.711.101	70	New	15.00
SM102/72 Gripper pads diamond cut (20mm)	58.711.101/01	43	New	15.00
Compression spring	5E.010.101	46	New	3.00
Short stroke cyl/valve exchange (PP284)	61.184.1133	1	New	140.00
Short stroke cyl/valve exchange (PP284)	61.184.1136	1	New	140.00
Cylinder/valve 12 x 12 exchange (PP295)	61.184.1142	1	New	150.00
Cylinder/valve 10 x 4 exchange 6mm Straight	61.184.1151	1	New	175.00
Cylinder/valve 10 x 4 exchange 6mm straight	61.184.1151	9	S/Hand	120.00
Cylinder valve 20 x 15 exchange	61.184.1161	1	New	140.00
Cylinder/valve 102 sheet stop reconditioned exchange	61.184.1181	4	S/Hand	120.00
3/2 way valve reconditioned exchange	61.184.1191	2	S/Hand	180.00
Blanket wash solenoid (bank of 3)	61.184.1221	1	New	850.00
102 valve 4/2 way 4mm connector	61.184.1311	3	New	130.00
Duct key coupler	61.186.5321	4	S/Hand	5.00
Duct key motor retaining clip	61.186.5331	29	S/Hand	3.00
Snap in segment SuperBlue	61.215.706	1	New	35.00
3/2 way valve reconditioned exchange	61.335.004	0	S/Hand	350.00
SM102 Delivery gripper bar reconditioned	61.525.300	2	S/Hand	1500.00
Vibrator shaft compression spring	62.011.426	1	New	1.00
GTO52 sheet slowdown bracket	62.015.501	1	New	95.00
GTO small size delivery stop	62.015.517	2	S/Hand	40.00
GTO delivery opening cam	62.015.550	2	New	35.00
MO CPC duct clutch	62.090.048	1	New	280.00
Hexagonal pivot bolt (short version)	63.030.232	6	S/Hand	4.00
SM74/MO metering roller gear	63.030.523	1	New	45.00
Boge Compressor SBD-R250 gasket set	63.102.2051	1	New	55.00
Boge seperator with head assembly	63.102.2061	1	New	160.00
Blanket wash connection piece	63.205.017	3	New	48.00
Stand-off bolt	63.421.016	1	New	15.00
Blanket tension worm gear	66.006.031	17	New	35.00
Damp vibrator journal OS	66.010.087	1	New	25.00
Threaded spindle complete	66.010.090	1	New	45.00
Damp vibrator journal DS	66.010.187	1	New	25.00
SM102/72/S-line inker holding shaft 300mm MV.003.684	66.010.314	8	New	60.00
Journal box (Cog top, hole left side)	66.010.328	1	New	75.00
Journal box DS (Cog top, hole right side)	66.010.329	2	New	75.00
Worm gear roller adjust complete	66.010.345	1	New	58.00
Worm gear roller adjust worm only	66.010.345F	4	New	30.00
Adjuster collar	66.010.346	1	New	1.00
Stop plate foam overrun buffer	66.014.067F	3	New	12.00
Feed adjusting disc	66.016.118	1	New	20.00
Double sheet cut out disc	66.016.305	1	New	15.00
Bolt	66.016.230	1	New	15.00
Pin	66.016.250	1	New	10.00
Adjusting pin and handle	66.016.425	1	New	20.00
Handle rod support	66.016.504	1	New	25.00
Retention Pin	66.016.507	1	New	15.00
Knurled nut	66.017.144	1	New	12.00
SM102/72 Feed side stop complete	66.017.317	3	S/Hand	25.00
102/72/S pile guide switching tongue (earlier)	66.017.320	2	New	10.00
102/72 tension roller guide pin	66.020.019	1	New	8.00
Feed cage steel roller	66.020.115	1	New	12.00
Circular brush holder	66.020.119	3	S/Hand	20.00
T Handle Socket Wrench 10mm	66.024.019	1	S/Hand	13.00
Horseshoe hand plate pliers	66.024.023	1	New	25.00
Lifting sucker spring	66.028.010	5	New	2.00
Hose connection	66.028.012	11	New	3.00
Feeder head tension spring	66.028.021	2	New	8.00
Sucker head forwarding guide piece DS	66.028.037	1	New	20.00
Compression spring	66.028.044	1	New	4.00
Forwarding sucker knob operated OS	66.028.046	2	S/Hand	100.00
Forwarding sucker spring	66.028.053	2	New	4.00
Forwarding sucker knob operated DS	66.028.056	2	S/Hand	100.00
Air tube manifold	66.028.058	1	New	12.00
Pile stop complete MV.003.893	66.028.114	5	New	20.00
Feeder head paper steadier	66.028.115	1	New	6.00
Forwarding sucker clamp tension piece	66.028.124F	10	New	8.00
Snap spring	66.028.309	1	New	6.00
Lifting sucker nozzle	66.028.809	2	New	8.00
Distance washer 0.1mm	66.030.021	3	S/Hand	1.00
Distance washer 0.3mm	66.030.022	3	New	2.00
Bearing Journal DS	66.030.027	2	S/Hand	60.00
Bearing Journal OS	66.030.028	1	S/Hand	55.00
Damper spring	66.030.030	8	S/Hand	2.00
Pan roller driving ring	66.030.068	2	New	20.00
Damping water container	66.030.087F	1	New	150.00
Damping water container	66.030.087F	4	S/Hand	60.00
Damping tube spout holder	66.030.091	3	New	15.00
Damping water tube and fittings	66.030.094	1	New	25.00
SM102 sheet paper smoother  DS	66.072.080	1	New	40.00
SM102 sheet paper smoother  OS	66.072.082	2	New	40.00
SM102 smoother narrow cpl	66.072.089	3	New	35.00
SM102 smoother narrow cpl	66.072.089	4	S/Hand	20.00
SORS leaf spring sheet smoother (top)	66.072.095	32	New	10.00
SORS leaf spring sheet smoother	66.072.096	6	New	10.00
SORS cover plate	66.072.101	9	New	20.00
SM/S-line Sidelay sheet stop	66.072.209	2	New	21.40
Sidelay pressure adjust screw MV.031.417	66.072.219	1	New	25.00
102 sidelay sheet stop OS	66.849.007	1	S/Hand	15.00
SM102 straight smoother cpl cardboard	66.891.001F	6	New	35.00
SM102 sheet smoother  DS	66.891.003F	2	New	40.00
SM102 sheet smoother  OS	66.891.004F	2	New	40.00
SM102 sheet smoother  OS	66.891.004F	1	S/Hand	20.00
SM74 damping flow distributor 6 col	67.718.205	1	New	55.00
72/SORM Blanket bars	68.006.002	2	S/Hand	50.00
Hex Head hatch bolt	68.021.055	2	New	8.00
GTO plate clamp guide	69.007.062	4	New	3.00
GTO52 CPC duct roller plasma coated	69.008.001	1	New	650.00
GTO52 lever operated ink duct	69.008.300	2	S/Hand	1250.00
PM52GTO washup tray	69.010.191	1	New	98.00
GTO/MO gripper complete (with urethane gripper)	69.011.727	11	New	30
GTO52 delivery gripper bar complete	69.014.003F/04	5	New	750.00
GTO52 delivery gripper bar rod	69.014.053	2	New	45.00
GTO52 starwheel rod with 6 discs	69.014.111	4	S/Hand	30.00
GTO delivery rear stop	69.015.305	2	S/Hand	40.00
GTO52 Feed pile rear blast with brackets	69.017.080	1	S/Hand	40.00
GTO52 Feed pile rear blast brackets	69.017.081	2	New	15.00
GTO52/MO side separator holder	69.017.085	2	S/Hand	20.00
GTO Lay guide roller lever	69.022.124	1	New	240.00
GTO52 DDS rider support complete	69.030.426	2	S/Hand	35.00
GTO52 nip guard pull rod	69.033.004	2	New	4.00
GTO52 nip guard trip cam	69.033.012	1	New	35.00
GTO/KORD spray powder tube	69.232.018	1	New	55.00
GTO52 plate clamp rear single action	69.353.732F	1	New	800.00
GTO52 Numbering rider roller	69.431.170	2	New	240.00
GTO52 plate clamp front single action	69.478.001	1	New	900.00
GTO52 Sheet guide shaft	69.731.501	2	S/Hand	50.00
GTO52 Impression jacket	69.732.201	2	New	35.00
SM102 turning valve	71.005.250	1	New	350.00
SM102/72 Ink stripe threaded spindle	71.008.006	0	New	40.00
SM102/72 Ink stripe control large gear	71.008.008	1	New	65.00
SM102/72 Ink stripe control gear	71.008.009	0	New	40.00
SM102 distributor journal DS	71.009.012	2	S/Hand	45.00
SM102/72 roller spring bushing	71.010.009	2	New	20.00
SM102/72 ink roller stop	71.010.010	1	New	15.00
SM102/72 journal box DS	71.010.041	1	S/Hand	25.00
SM102/72 journal box OS #2 roller	71.010.046	1	New	120.00
SM102/72 journal box OS #4 roller	71.010.048	2	New	85.00
CD102 Pin for eccentric gear roller adjust	71.010.050	1	New	10.00
Ink adjust bearing & pin & block	71.010.052	1	New	5.00
102/72 vibrator journal DS	71.010.078	1	New	38.00
102/72 vibrator journal OS	71.010.079	1	New	38.00
Vibrator shaft connecting link DS	71.010.083/04	3	New	7.00
Journal box washer	71.010.085	12	New	2.00
Vibrator shaft connecting link OS	71.010.096	3	New	7.00
102/72 red side plate set MV.004.195	71.010.013	1	New	65.00
102 Vibrator journal box OS 1990-1995 spindle ductor	71.010.116/02	2	New	55.00
102 Vibrator journal box OS short ductor	71.010.116/03	2	New	55.00
Adjusting screw	71.010.149	4	New	8.00
Roller colour indicator disk red	71.010.152	2	New	2.00
Roller colour indicator disk blue	71.010.153	2	New	2.00
Roller colour indicator disk white	71.010.154	1	New	2.00
Roller colour indicator disk yellow	71.010.155	2	New	2.00
SM102/72 Z roller support OS	71.010.310	1	New	50.00
SM102 Z roller 20mm journal end sleeve hex head	71.010.318	2	New	85.00
102 rider roller support complete	71.010.330	2	New	45.00
102 rider roller support complete	71.010.330	2	S/Hand	25.00
102 rider roller angle	71.010.332	3	New	3.00
Support Pin DS	71.010.366	1	New	15.00
Intermediate roller latch OS	71.010.378	2	New	25.00
Support Pin OS	71.010.383	1	New	15.00
102/74 Roller oscillation screw	71.010.704	1	S/Hand	5.00
SM102/72 Metering roller gear & spacer	71.030.228	2	S/Hand	35.00
SM102/72 Metering roller OS support	71.030.230	2	New	45.00
SM102 Damper lever complete assembly and metering cam DS	71.030.239	1	S/Hand	400.00
SM102/72 Metering roller OS support lever	71.030.240	2	New	65.00
Adjusting worm gear	71.030.248	1	New	65.00
102/72 damper journal DS	71.030.258	2	New	65.00
102/72 damper journal OS	71.030.259	1	New	65.00
Spring rod	71.030.263	1	New	35.00
102/72 damping distributor bearing flange MV.022.126	71.030.264	1	New	120.00
SM102 Alcolor gear cover	71.030.285	1	New	8.00
S/line damper level support with clip	71.030.306	1	New	45.00
SM72/102 finger guard link	71.508.408	1	New	35.00
SM72/102 finger guard push rod	71.508.431	1	New	20.00
SM72/102 hinged footboard clamp and stop	71.508.716	2	New	20.00
SM72/SORM Front plate clamp QA with HD instant reg	72.458.701F	1	New	950.00
SM72/SORM Front plate clamp indexing screw MV.022.219	72.458.704	6	New	25.00
Snap in segment SuperBlue	73.215.703	1	New	35.00
SM102 Feed board 41.072.075	76.072.085/07B	1	New	450.00
GTO register adjust DS complete	79.007.070	1	New	280.00
GTO52 Ink repellent blanket 449x519x0.8	79.005.037	1	New	85.00
GTO52 Hinged sheet smoother	79.022.024	4	S/Hand	25.00
GTO52 Hinged sheet smoother short	79.022.046F	2	S/Hand	25.00
GTO Spring support piece MV.021.910	79.022.100	1	New	400.00
GTO52 Impression cyl complete MV.022.471	79.581.001	1	New	2500.00
GTO52 pressing bar	79.581.040F	1	S/Hand	95.00
Ball Bearing 6206 2RS 00.520.2189	7G.414.613	1	New	18.00
Wash bar support	81.010.196	1	New	25.00
SM102 Blanket wash bearing plate complete MV.029.384	81.205.001	1	New	560.00
SM102 blanket wash support OS	81.205.008	1	New	50.00
SM102 blanket wash wiper roller complete MV.034.233	81.205.107	1	New	330.00
SM102 Blanket Wash ink plate	81.205.125	2	New	35.00
CD102 blanket wash spray bar MV.031.812	81.205.127	5	New	700.00
102 blanket wash spray bar (older brush system)	81.205.130S	1	New	300.00
102 blanket wash spray bar (older brush system)	81.205.130S	1	S/Hand	200.00
102/72 Drop tube nozzles	81.205.132	41	New	0.99
Hose with fittings MV.022.518	81.205.611	1	New	38.00
SM102 ink duct over-running clutch exchange	82.008.005	4	New	500.00
Roller journal shaft OS 353mm MV.030.249	82.010.201	2	New	60.00
Roller shaft knurled screw	82.010.203	1	New	6.00
Roller journal shaft OS 353mm No 1 roller	82.010.204	1	New	60.00
102 hooker gripper tip steel	82.582.627	3	New	28.00
102/72 gripper complete	82.582.727F	1	New	65.00
102 reversing drum segment bearing DS	82.583.314	1	New	150.00
102/74 Reversing drum clamping nut	82.583.348	1	New	8.00
102/74 Reversing drum pin	82.583.372	1	New	8.00
102/72 Circumferential register pinion set MV.004.584	86.007.517	2	New	60.00
S-line impression gripper roller lever MV.022.639	86.011.049	1	New	220.00
Air cylinder exchange 25x25	87.334.001	1	New	120.00
Air cylinder reconditioned exchange	87.334.001	5	S/Hand	60.00
Air cylinder reconditioned exchange	87.334.002	2	S/Hand	85.00
SM102 Washup blade cylinder (MV.039.231)	87.334.007	4	S/Hand	70.00
SM102 Blanket Wash air cylinder DS recon exchange	87.334.011	0	New	140.00
SM102 Blanket Wash air cylinder DS recon exchange	87.334.011	9	S/Hand	150.00
SM102 Blanket Wash air cylinder OS recon exchange	87.334.012	0	S/Hand	110.00
SX102 delivery sheet stop cylinder 10 x 50 stroke	87.334.013	3	S/Hand	65.00
Short stroke CD102 Impression wash exchange 63 x 13 stroke	87.334.014	1	New	250.00
SM102/XL105 autoplate exchange	87.334.017	1	New	680.00
Air cylinder 25 x 20stroke	87.334.018	5	S/Hand	70.00
SM102 Cam follower segment gear INA F-229818	87.583.319	1	New	65.00
Gripper housing	87.583.335	1	New	30.00
Plastic washer	89.013.029	2	New	2.00
GTO Spring support piece	89.013.030	2	New	20.00
GTO spring rod	89.013.037	2	New	20.00
GTO52 stream feed forwarding sucker OS	89.028.047	1	New	200.00
GTO52 stream feed forwarding sucker DS	89.028.057	1	New	200.00
SM52/GTO CPC ink zone glass screen	89.090.912	1	New	450.00
SM102/72 Ink duct clutch for CPC MV.022.879	91.008.005	1	New	700.00
CPC ink zone eccentric MV.022.880	91.008.008	9	New	35.00
Duct roller over-running clutch old type	91.008.018	1	New	120.00
Duct key shim	91.008.019	5	New	0.50
CPC ink key nut	91.008.102	2	New	22.00
Duct key washer	91.008.117	3	New	0.50
Duct key thick washer	91.008.123	1	New	1.00
CPC ink duct foil pull bolt & spring	91.008.304	2	New	8.00
Z roller bearing bush MV.031.043	91.010.322	20	New	220.00
Z roller cam MV.004.799	91.010.323	3	New	240.00
Z roller cam MV.004.799	91.010.323	1	S/Hand	160.00
Washer	91.010.333	5	New	2.00
Z roller adjuster sleeve & threaded ring	91.010.361	1	New	15.00
Roller chain	91.015.329	2	New	35.00
102 feed pile bottom switching tongue	91.017.717	12	New	10.00
Governor foot with larger air holes	91.028.475	1	S/Hand	15.00
SM74 Storage rear sucker collar	91.580.246	4	New	10.00
SM74 Storage rear sucker set DS	91.580.253	5	New	20.00
SM74 Storage rear sucker set OS	91.580.262	1	New	20.00
SM102/72 hooked gripper holder	91.581.028F	1	New	65.00
SM102/72 hooked grippers (steel)	91.581.727N	3	New	28.00
102/SORS Delivery side jogger OS 500mm	91.889.214F	1	New	85.00
PM52GTO/MO Impression control recon exchange	92.184.1001		S/Hand	225.00
MO/GTO clamping piece	92.581.025	1	New	35.00
102/72 dampers for impression rod	93.012.135	6	New	1.00
102/72 delivery gripper	93.014.307	1	New	30.00
SM72 delivery drum SuperBlue	93.014.704	1	S/Hand	490.00
102 Delivery slowdown bracket no spring	93.015.350	1	second	55.00
SM102/72 Delivery slowdown wide wheels MV.005.247(PP6134)	93.015.353	7	New	40.00
Profile rubber clips	93.021.079	6	New	8.00
Damping ductor lever DS	93.030.020	1	New	175.00
Pin	93.033.010	1	New	20.00
102 jacket spring rod MV.032.276	93.216.406	1	New	55.00
Starwheel rods complete	93.216.501	141	S/hand	5.00
SM72/SORM rear edge plate clamp recon	93.353.001	1	S/Hand	190.00
102 delivery gripper clamping piece	93.525.308	1	New	35.00
SM102/72 delivery gripper metal pad + screw	93.525.310/02	10	New	8.00
Toothed belt pulley MV.032.856	93.580.305	2	New	85.00
SM102 lower pincer gripper screw	93.580.396	8	New	8.00
QM/PM46 delivery guide pulley	A1.014.141	1	S/Hand	45.00
QM/PM46 sucker feed bar complete	A1.016.305S	1	New	400.00
QM/PM46 eccentric sleeve	A1 016.316	2	New	2.50
QM/PM46 feeder back spring	A1.017.237	2	New	20.00
SM102 Lifting sucker adjustment bevel gear	A1.030.023/02	2	New	8.00
PM46 spout washer	A1.030.327	6	New	2.00
QM/PM46 autoplate pin	A1.650.073	2	New	8.00
QM/PM46 autoplate bracket	A1.650.074	2	New	8.00
QM46DI Transport roller brush	A4.016.218	105	New	2.25
Water cooling hose 245mm	A4.272.010	6	New	17.00
QM46DI washup air cylinder DS	A4.334.015	1	New	125.00
QM46DI washup air cylinder OS	A4.334.016	1	New	125.00
XL105 feeder alignment tool	BV.011.0963/A	1	New	25.00
Pressure cylinder	CA.011.014	2	New	50.00
Puck	CA.011.015	1	New	50.00
Pressure ring	CA.011.019	3	New	15.00
Clamping ring	CA.011.020	3	New	50.00
Spring (and pin) for delivery slowdown bracket	C2.015.355	9	New	4.00
102 2/2 way valve for washup unit exchange	C2.335.001	1	S/Hand	160.00
SM102 throttle valve recon exchange	C2.335.075	1	S/Hand	750.00
Flat toothed belting	C2.617.182	1	New	35.00
Drive dog	C2.617.497	1	New	28.00
102 gripper holder	C3.011.128	3	New	60.00
102 spring support	C3.011.131	2	New	6.00
SM102 steel gripper	C3.011.627	58	New	25.00
SM102 urethane gripper	C3.011.727	297	New	25.00
102 gripper pad diamond cut C4.011.921 (18mm)	C3.011.920	620	New	15.00
102 gripper stop	C3.581.129	1	New	25.00
102 gripper stop	C3.581.130	1	New	25.00
102 hooked gripper and holder	C3.581.627	1	New	85.00
Worm support	C4.008.061	1	New	35.00
102 Gripper spring support	C4.011.021	3	New	17.00
102 stop lever and pin complete MV.050.161	C4.313.420	1	New	200.00
102 sheet smoother DS	C4.372.383	1	New	55.00
102 sheet smoother OS	C4.372.384	1	New	55.00
102 sheet smoother OS recon	C4.372.384	1	S/Hand	25.00
102 smoother top blade DS	C4.372.394	25	New	15.00
102 smoother top blade OS	C4.372.395	23	New	15.00
102 electronic eye adjust holder	C4 372.402	1	New	6.00
102 air blast tube	C4.372.503/01	20	New	2.00
SM102 delivery gripper bar (may also be XL105 F4.514.001)	C4.514.001	7	New	3200.00
102 plate clamp eccentric	C5.006.413	1	New	65.00
102 sheet arrival pin	C5.016.110	1	New	8.00
102 feeder front flap roller lever	C5.016.225	1	New	70.00
102 forwarding roller tilting lever assembly MV.030.864	C5.016.279	2	New	280.00
SM102/CD102 forwarding sucker long act OS MV.103.290	C5.028.046F	1	New	350.00
SM102/CD102 forwarding sucker long act OS	C5.028.046F	1	S/Hand	150.00
SM102/CD102 forwarding sucker long act DS	C5.028.056F	1	S/Hand	150.00
SM74/102 Feeder Foot (HDM Feeler)	C5.028.075	1	New	70.00
102 forwarding sucker gear rack	C5.028.125	1	New	8.00
SM102 Lifting sucker adjustment support	C5.028.195S	1	New	55.00
102 air blast holder OS MV.039.450	C5.028.201	1	New	70.00
SM102 Lifting sucker adjustment support	C5.028.208/01	1	New	6.00
SM102 preset sheet steadier	C5.028.115	1	New	12.00
102 coater valve bolt	C5.043.228	2	New	30.00
SM102 Pull Rail Preset feeder	C5.072.605	2	New	80.00
SM102 Pull Rail (Refined surface) pair	C5.072.626	2	New	100.00
Inkliner geared motor FS.196.0214 exchange	C5.196.0214	1	New	700.00
Inkliner symbol foil CAN FS.196.0227	C5.196.0226	1	New	8.00
Inkliner symbol foil	C5.196.0227	2	New	8.00
Inkliner sealing ring	C5.196.0242	19	New	9.50
Inkliner sealing cap	C5.196.0314	2	New	8.00
102 preloader guide stop	C5.472.108	1	New	28.00
102 coater adjusting worm gear OS MV.016.825	C5.721.040	1	New	98.00
Ring nut	C6.011.116	1	New	45.00
Retainer plate	C6.011.019	8	New	6.00
SM102/72 Cam follower Impression/transfer/storage INA F-229817	C6.011.121/01	14	New	80.00
Pin	C6.011.141	2	New	5.00
102 delivery cam operating shaft for 81.014.039	C6.014.024	1	New	150.00
102 delivery cam operating shaft for C6.014.039	C6.014.024	1	New	150.00
102 delivery cam	C6.014.039	1	New	195.00
Spacer	C6.014.425	2	New	4.00
Spacer sleeve	C6.014.980	1	New	4.00
102 support starwheel	C6.015.342	3	New	45.00
102 support starwheel	C6.015.343	3	New	45.00
102 delivery guide strap	C6.015.345	6	New	40.00
102 slowdown bracket MV.034.528	C6.015.530	1	New	180.00
SM/CD102 lubrication 4/2 way valve	C6.302.502	1	New	420.00
102 Delivery jogger guiding sleeve	C6.315.707	1	S/Hand	55.00
Sheet jogger spindle nut complete MV.031.195	C6.315.709F	1	New	125.00
Paddle	C6.516.389	6	New	20.00
102 bush	C6.516.434	2	New	35.00
CD102 cover plate	C6.521.712	1	New	2.00
102 phase displacement eccentric bush	C8.010.204	1	New	65.00
Angle lever complete MV.024.059	C8.030.210B	2	New	75.00
Angle lever	C8.030.210	1	New	28.00
102 blanket wash dowel screw	C8.204.008	1	New	26.00
CD102 collar for brush roller	C8.204.014	1	S/Hand	15.00
Bolt and spacer	C8.204.034	3	New	12.00
CD102 Impression wash brush support MV.037.318	C8.204.037	1	S/Hand	25.00
Bearing F-552367	C8.205.019	2	New	40.00
102/74 Autoplate rear pin w/ 14.022.013 spring	C8.458.725	57	New	15.00
support	C8.458.746	2	New	8.00
Bush D18mm	C8.458.754	2	New	4.00
Bush D17.92mm	C8.458.756	2	New	4.00
Leaf spring	C8.633.814	1	New	35.00
Tube bend rubber for guide plate	C9.014.824	1	New	25.00
CD102 Delivery guide lever	C9.887.002	1	New	28.00
Bolt	C9.887.005	2	New	4.00
Torsion spring	C9.887.006	2	New	9.00
CD102 Delivery connecting link	C9.887.064	1	New	28.00
XL105 lubrication distributor	F2.002.031	1	New	390.00
XL105 coater cylinder gripper bar	F2.011.109	2	S/Hand	1200.00
102/105 gripper spring support	F2.011.131	5	New	4.00
Grippers steel 74/52/105/106/SX102	F2.011.627	196	New	16.00
XL106 impression control pin	F2.012.054	9	New	12.00
Timing pulley	F2.016.208/04	2	New	85.00
Timing pulley	F2.016.278/03	1	New	85.00
Timing pulley	F2.016.279/02	2	New	85.00
Plus feeder head drive shaft	F2.016.451	4	New	350.00
Lateral sheet blower rope	F2.016.680	2	New	25.00
Brush roll MV.050.031	F2.020.124	2	New	35.00		Welcome to the Press Parts clearance list, this list can be searched via Heidelberg part number or description.
Brass shim plate  0.1	F2.022.026	1	New	1.00
Brass shim plate  0.05	F2.022.027	4	New	1.00
Brass shim plate  0.03	F2.022.028	2	New	1.00		To run a search just use the built in search function, ctrl+f on a PC or CMD+f on MAC
106 Pin	F2.022.111	1	New	6.00
106 pin	F2.022.413	1	New	6.00
102/105 suction head timing cam set complete	F2.028.010	1	New	3000.00		If you need any assistance at all, or to place an order for any of these parts contact us via Email:
102/105 forwarding sucker pair non HDM	F2.028.160/170	4	New	300.00
102/105 forwarding sucker complete MV.030.076	F2.028.180	1	New	250.00
102/105 forwarding sucker complete MV.031.608	F2.028.190	1	New	250.00		[email protected] or on Phone: +44 (0)20 8502 3059
102/105 lifting sucker guide complete MV.041.011	F2.028.260	5	New	130.00
102/105 guide spring	F2.028.264	3	New	4.00
102/105 compression spring	F2.028.265	3	New	3.00
102/105 lifting sucker guide complete MV.041.010	F2.028.270	2	New	130.00
102/105 sucker guide	F2.028.270	3	New	55.00
106 damp roller adjuster	F2.030.174	1	New	38.00
105/106 intermediate roller driver	F2.030.725	1	New	46.00
106 Rider roller lock screw	F2.030.726	1	New	5.00
105/102 pinion	F2.033.414	2	New	35.00
105/106 gear	F2.033.418	1	New	45.00
106 autoplate track support	F2.033.486	1	New	25.00
106 autoplate track support	F2.033.493	1	New	20.00
105/106 autoplate guide roller	F2.033.635	2	New	15.00
102/105 side lay bellows	F2.072.140	8	New	75.00
Coater pump diaphragm	F2.148.1041	1	New	240.00
106 mounting support pin	F2.204.118	3	New	4.00
XL106 cross bar pin	F2.204.184	3	New	3.00
XL105/6 steel gripper	F2.581.627	39	New	35.00
XL105/6 connecting piece for blow system MV.052.890	F2.805.538	1	S/Hand	95.00
XL105 double gripper pad	F2.997.012	1	New	40.00
XL105/6 gripper bar support roller	F4.011.121	21	New	95.00
XL105 clamping bolt	F4.011.135	12	New	25.00
XL105 clamping bolt	F4.011.135	2	S/Hand	15.00
Clamping pieces	F4.011.136	13	New	4.00
102/105 Guide roller complete	F4.020.103	1	New	95.00
102/105 Guide brush complete	F4.020.104	1	New	85.00
Air cylinder 28 x 25 exchange	F4.334.003	1	New	135.00
Air cylinder 32 x 25 reconditioned exchange	F4.334.027	1	S/Hand	125.00
Air cylinder 10 x 18 exchange	F4.334.036	5	New	195.00
Air cylinder 10 x 18 reconditioned exchange	F4.334.036	2	S/Hand	115.00
Air cylinder 32 x 25 reconditioned exchange	F4.334.044	6	S/Hand	125.00
Air cylinder 25 x 25 reconditioned exchange	F4.334.048	2	S/Hand	125.00
XL75/105 short stroke cylinder 32 x 12	F4.334.051	10	New	125.00
XL105 short stroke cylinder 50 x 10 recon exchange	F4.334.052	1	S/Hand	175.00
105/106 plate change air cylinder 25 x 360mm	F4.334.057	2	New	230.00
Pilot operated check valve Rethroth 0 821 003 036	F4.335.014	2	New	40.00
XL105/106 impression control exchange 30/40	F4.335.033	2	New	1950.00
102/105/106 brush	F4.514.492	1	New	150.00
102/105 square spindle for slowdown MV.050.218 with support	F4.514.571	1	New	140.00
Collar Nut	F4.514.948	1	New	6.00
SM102 sheet jogger stop OS	F4.514.976	1	New	85.00
XL106 PerfectBlue jacket @ 0.295	F4.581.194	1	New	2500.00
XL106 PerfectBlue jacket @ 0.305	F4.581.195	1	New	2500.00
Headless screw	F4.614.565	1	New	5.00
Suction tape grey 9mm rib	F4.614.821	8	New	24.00
Shoulder bolt	F4.714.214	1	New	4.00
Weko spray bar tube	F7.164.1677	44	New	3.00
Air cylinder 10 x 18 straight entry reconditioned exchange	F7.334.001	1	S/Hand	115.00
102 sheet stop recon exchange	F7.335.002	1	S/Hand	215.00
102 3/2 way valve	F7.335.007	1	New	145.00
XL105 cylinder/valve recon exchange MV.015.604	F7.335.019	2	S/Hand	185.00
102 sheet support high front	F7.514.560	2	New	35.00
102 sheet support low front	F7.514.562	2	New	35.00
102 sheet narrow support low front	F7.514.563	1	New	35.00
Sheet support	F7.514.567	2	New	60.00
SM102 side lay vacuum plate	F7.514.573	3	New	120.00
Air cylinder 12 x 18 delivery front edge recon exchange	F9.334.008	2	S/Hand	160.00
Transport tape 12x4x2530	FH.1025131/01	2	New	60.00
Inkliner foil legend	FS.196.0227	1	New	6.00
SM52 Stainless Steel Impression Jacket	G1.011.173N	2	New	50.00
SM52 Stainless Steel Impression Jacket	G1.011.173N	1	Second	25.00
SM52 Blanket bars (pair)	G2.006.003	2*	New	400.00
SM102/72 Duct key threaded bolt complete MV.031.572	G2.008.103F	1	New	35.00
SM52 Distributor roller journal OS	G2.009.010	4	New	60.00
SM52 Distributor roller Exchange (PP5105)	G2.009.015	1	New	250.00
Gripper screw Q1	G2.011.130	236	New	2.00
SM52 delivery gripper bar	G2.014.001	1	New	1400.00
SM52 segment with half shell MV.030.745	G2.014.202	2	New	65.00
SM52 starwheel rods with disks MV.037.753	G2.014.205	7	New	75.00
SM52 starwheel rods with disks MV.037.753	G2.014.205	4	S/Hand	50.00
SM52 Super Blue delivery jacket	G2.014.401	1	New	150.00
SM52 Super Blue delivery drum	G2.014.406	1	New	1000.00
SM52 Super Blue delivery shell MV.028.023	G2.014.410	1	S/Hand	450.00
SM52 carrier blower holder and blower	G2.028.090	1	New	250.00
SM52 delivery window	G2.033.220	1	New	385.00
Short stroke cylinder recon exchange	G2.184.0040	1	New	130.00
Water cool hose 200mm +/-2	G2.272.008	7	New	16.00
SM52 impression control new style recon exchange	G2.335.159	2	S/Hand	435.00
5/2 way valve new style 4mm	G2.335.492/01	1	New	98.00
5/2 way valve new style 6mm	G2.335.493/01	8	New	98.00
Transport tape 12x4x2530	G2.418.108	2	New	8.00
QM46 Autoplate cylinder exchange H20 D40	G3.334.001	3	S/Hand	198.00
SM52 delivery gripper for UV	G4.014.002	6	New	24.00
Button in sheet guide	G4.212.211	1	New	2.00
Compression spring for button	G4.212.212	1	New	1.00
Air Cylinder 20 x 50 stroke 4mm fittings recon exchange	G4.334.004/04	6	S/Hand	80.00
QM46 cylinder switching exchange	G4.334.007	4	S/Hand	120.00
SM52 Pressing bar	G4.581.401F	1	S/Hand	100.00
SM52 Pressing bar MV.031.448	G4.581.401F	1	New	250.00
Operation tool	H2.007.129	1	New	24.00
SM74 delivery front jogger	H2.015.480	2	New	48.00
PM74 feeder air valve recon exchange	H2.335.001	3	S/Hand	170.00
KORD damper ratchet set	KOR 0821/2	1	New	260.00
KORD damper eccentric	KOR 0821	5	S/Hand	20.00
KORD sheet guide	KOR 3313F	1	S/Hand	20.00
KORD Front roller bearing guide block & journal DS	KOR 494K-DS	2	New	145.20
KORD Feeder sheet holder guide piece	KS089	5	New	49.28
KORD handle	KS1519	1	New	25.00
KORD delivery two-up centre divider	KS1592	1	S/Hand	25.00
KORD sheet smoother complete	KSBA 2224	3	S/Hand	25.00
KORD sheet smoother over lay complete	KSBA 2246	2	S/Hand	25.00
102 CPC ink duct end block (pair)	L2.008.113	1	New	70.00
102 CPC ink duct end block LEFT	L2.008.113/03	2	New	40.00
102 CPC ink duct end block RIGHT	L2.008.114/03	2	New	40.00
CD74 Distributor journal OS	L2.009.020	2	New	80.00
CD74 Distributor journal DS	L2.009.021F	2	New	199.00
Roller lock screw	L2.010.079	2	New	12.50
XL75 Forwarding roller lever	L2.016.231	1	S/Hand	80.00
CD74 Z roller journal DS MV.055.641	L2.030.481	1	New	320.00
CD74 Air cylinder roller switching	L2.334.001	1	New	280.00
CD74 Air cylinder roller switching	L2.334.001	1	Exchange	199.00
XL75 damper piston 40 dia x 25 stroke	L2.334.002	2	New	175.00
CD74/XL105 double ended air cylinder	L2.334.009	2	New	190.00
Air Cylinder 25 x 25 with 4mm fittings recon exchange 00.580.3909	L2.334.034	2	New	115.00
CD74 cylinder valve reconditioned exchange	L2.335.002	3	S/Hand	198.00
Cylinder valve single acting recon exchange	L2.335.023	2	S/Hand	175.00
Blanket wash pump (bank of 2)	L2.335.025	3	New	2000.00
Blanket wash pump (bank of 4)	L2.335.045	1	New	4000.00
Air cylinder single acting	L2.335.050	2	S/Hand	175.00
CD74 Ink ductor cylinder/valve reconditioned exchange 4mm elbow	L2.335.051/03	4	S/Hand	230.00
PM74 feeder suction head (head only no suckers)	L3.028.000	1	New	4500.00
XL75/105 gripper steel for UV	L3.511.727	16	New	20.00
CD74 plate spring for sheet slowdown	L4.014.355	2	New	9.00
CD74 eccentric bolt sheet brake	L4.014.358	2	New	4.00
CD74 reducer in delivery guide plate	L4.014.391	1	New	4.00
CD74 connecting link DS	L4.015.404	2	S/Hand	8.00
CD74 connecting link OS	L4.015.407	1	S/Hand	8.00
Card separator LH	L4.028.168	2	New	10.00
CD74 support	L4.015.413	1	S/Hand	8.00
CD74 bent plate for screen	L4.212.510	1	New	6.00
Air maintenance unit	L4.335.002	1	New	550.00
XL75 Guide plate pivot lever assembly	L6.805.308	1	New	130.00
Blanket wash pump (bank of 6)	L8.335.001	1	New	6000.00
SM74 Drop tube distributor	M1.205.226	1	New	8.00
SM74 First distributor guide cam	M1.009.016/01	3	New	85.00
SM74 Transfer jacket clamp bolt	M2.005.009	2	New	15.00
74 transfer jacket clamp support	M2.005.036	6	New	12.00
74 Plate clamp bearing bush MV.016.150	M2.007.020	1	New	30.00
74 plate clamp spring	M2.007.025	28	New	2.00
SM74 Ink duct end block Left DS	M2.008.113	1	New	40.00
SM74 First distributor journal	M2.009.009	1	New	75.00
SM74 journal housing block	M2.009.018	1	New	20.00
SM74 First distributor gear	M2.009.017	2	New	95.00
SM74 blue inker bearing plate c/w adjuster DS	M2.010.020F	1	New	170.00
SM74 blue inker bearing plate c/w adjuster OS	M2.010.024F	3	New	170.00
SM74 form roller 2 adjuster	M2.010.035	1	S/Hand	25.00
SM74 Back roller lock spring cage (complete unit MV.039.496)	M2.010.048	14	New	30.00
SM74 Back roller lock pin	M2.010.049	2	New	15.00
SM74 Adjusting nut & sleeve for #2 form inker	M2.010.081	1	New	15.00
SM74 roller oscillation washer	M2.010.142	2	New	8.00
SM74 Ink vibrator control slide	M2.010.223	10	S/Hand	4.00
SM74 Collar (spring washer)	M2.011.117	69	New	2.00
SM74 spring rod guiding sleeve	M2.011.118	12	New	7.00
SM74 spring rod support collar	M2.011.119	17	New	3.00
SM74 compression spring	M2.011.127	18	New	8.00
74(52) gripper locking bushes	M2.011.129	4	New	8.00
SM102 swing gripper tips	M2.013.025	7	New	18.00
SM74 Delivery Gripper Bar DS.214.201	M2.014.003	1	New	2300.00
SM74 coater air blast tube	M2.014.205	1	S/Hand	230.00
74 slowdown rear drum reconditioned assembly	M2.015.306	1	S/Hand	95.00
SM74 Guide strap	M2.015.447	2	New	20.00
SM74 delivery backstop adjust shaft	M2.015.530F	1	New	98.00
SM74 delivery backstop bearing bush	M2.015.813	1	New	35.00
Slowdown band grey 9mm rib M2.015.871  set 3 (original Esband)	M2.015.843	7	New	50.00
Slowdown band grey 9mm rib M2.015.871  set 5 (original Esband)	M2.015.844	1	New	65.00
Slowdown band flat yellow M2.015.878  set 3 (original Esband)	M2.015.846	6	New	50.00
Slowdown band yellow set 5 (original Esband)	M2.015.870	2	New	70.00
Slowdown band yellow set 3 (original Esband)	M2.015.870	2	New	42.00
Slowdown band grey 1.5mm rib	M2.015.872	4	New	35.00
Green flat slowdown band	M2.015.880	43	New	20.00
Bag of 5 flat grey F4.514.578	M2.015.882	1	New	80.00
SM74 delivery support cpl	M2.015.891	1	S/Hand	65.00
SM74 bearing block	M2.016.204	1	New	58.00
SM74 Pillow block	M2.016.231/02	1	New	45.00
Retaining plate	M2.016.238	1	New	1.50
SM74 feed front roller bearing block with pin	M2.020.008	4	S/Hand	10.00
SM74 feeder tape shaft (with grub screw)	M2.020.022	1	New	22.00
SM74 feeder tape sleeve	M2.020.023	1	New	30.00
SM74 feed frame shaft	M2.020.212	1	New	45.00
SM52/74 crank handle	M2.024.120	1	S/Hand	65.00
SM74 Pan roller DS bearing lever	M2.030.513	1	New	25.00
SM74 block	M2.030.519/01	1	New	15.00
SM74 Metering Roller	M2.030.520	1	S/Hand	400.00
SM74 damp distributor journal DS	M2.030.543	1	New	60.00
SM74 damp distributor journal OS	M2.030.544	1	New	60.00
SM74 autoplate guide roller bearing OS MV.023.757	M2.033.033	1	New	18.00
SM74 autoplate guide roller bearing DS MV.017.041	M2.033.033	2	New	18.00
5/2 way valve	M2.184.1051	1	New	195.00
SM74 sheet hold cyl/valve recon exchange PP3659	M2.184.1071	1	S/Hand	95.00
Impression piston recon exchange	M2.184.1101	1	S/Hand	550.00
4 way distributor recon exchange	M2.184.1141	1	S/Hand	45.00
Blanking plug	M2.184.1161	5	New	15.00
4 way distributor recon exchange  4,4,6,6	M2.184.1201	1	S/Hand	45.00
4/2 way double valve 4mm	M2.184.1231	2	New	180.00
SM74 leg spring	M2.205.044	1	New	6.00
SM74 Blanket wash spindle collets (pair)	M2.205.065	1	New	6.00
SM74 Blanket wash take up spindle	M2.205.088	2	S/Hand	30.00
SM74 Blanket wash trigger MV.037.740	M2.205.130S/03	5	New	35.00
SM74 TransferPlus	M2.215.105N/08	6	New	850.00
SM74 segment gear guard	M2.583.316S	2	New	35.00
SM74 segment gear bolt (shaft)	M2.583.340	1	New	95.00
SM74 perfector index bolt	M2.583.386	1	New	45.00
Key	M3.006.656	1	New	6.00
adjusting screw	M3.006.658	2	New	10.00
screw	M3.006.666	1	New	10.00
XL75 Lifting sucker complete MV.056.997	M3.028.242	2	New	45.00
XL75 Lifting sucker complete MV.056.997	M3.028.242	2	S/Hand	5.00
CD74 feed rotary valve	M3.028.303	1	S/Hand	350.00
SM74 spring rod collar	M4.005.217	6	New	4.00
52/74/75/105 urethane gripper	M4.011.727	3	New	20.00
SM74 delivery gate pin	M4.015.441	1	New	15.00
SM74 delivery rear plate	M4.017.035	1	New	35.00
74 blanket wash profile	M4.250.009	4	New	50.00
SM74 Feeler for cloth supply	M4.205.046	1	New	65.00
SM74 drop tube clamping piece MV.025.837 complete	M4.205.402	4	New	45.00
SM74 blanket wash drop tube	M4.205.410	1	New	350.00
SM74 blanket wash drop tube Recon	M4.205.410	2	S/Hand	200.00
74 footboard screen	M4.221.008	4	New	75.00
74 footboard screen	M4.221.008	1	S/Hand	30.00
SM74 hose coupling elbow	M4.272.101	2	New	24.00
Air cylinder exchange	M4.334.010	4	New	135.00
Air cylinder 25 x 25	M4.334.011	2	S/Hand	110.00
SM74 solenoid	M4.335.001	1	New	280.00
SM74 impression control (new style) exchange	M4.335.007	1	New	850.00
SM74 coupler socket	M4.336.002	4	New	23.00
Worm gear roller adjust	MV.003.685	1	New	28.00
CD102 feed head lever complete	MV.003.882	1	New	175.00
SM74 Damper swivelling lever DS	MV.015.911	1	S/Hand	75.00
GTO/KORD/ Platen sheet holder complete	MV.017.696F	3	New	45.05
MO roller train tension bearing OS	MV.020.011	2	New	60.00
Vibrator journal box 66.010.187	MV.021.287	1	New	190.00
PTFE shim for smoother (set)	MV.021.580	3	New	4.00
102 Ink Fountain control rod 71.008.019	MV.022.049	2	New	320.00
102/72 Alcolor swivelling lever OS	MV.022.125	1	New	450.00
GTO52 pincer bar complete	MV.022.468	1	New	4000.00
Adjusting disk	MV.023.404	4	New	20.00
Guide Plate for preset feeder C6.020.129	MV.023.738	1	New	35.00
74 feed tape guide roll and shaft	MV.025.948	1	New	63.00
Expanding bolts	MV.026.709	6	New	2.00
SM102 slowdown element complete 93.015.350 (See PP6014)	MV.028.126	1	New	160.00
SM74 Blanket wash cloth roll feeler	MV.029.733	1	New	62.00
SM102 ink vibrator shaft	MV.030.662	1	New	1950.00
Set of bushes for autoplate	MV.030.842	2	New	35.00
Set of bushes for autoplate (incomplete missing 17.96)	MV.030.842	1	S/Hand	20.00
SM74 Blanket wash upgrade kit	MV.033.895	7	New	300.00
CD74 sheet brake unit	MV.034.775	2	S/Hand	450.00
102/105 support for separator F3.028.438	MV.035.451	1	New	125.00
SM74 side frame cover DS	MV.036.699	1	New	950.00
102 Delivery pile sensor holder C5.016.613	MV.037.756	1	New	390.00
SM74 spring cage for roller system	MV.039.496	23	New	40.00
XL75/CD74 lifting sucker M3.028.244	MV.056.999	2	New	40.00
74 sets of delivery gripper springs and sleeves	MV.058.618	2	New	120.00
SM52 pincer bar complete	MV.102.662	2	New	4500.00
Washup supply metering unit	R2.335.002	2	New	500.00
102/105 front lay leaf spring	SA.022.102	5	New	28.00
102 cross bar roller	SA.022.641	16	New	6.00
102 cross bar roller sleeve	SA.022.651	4	New	2.00
Technotrans alcohol connector coupler 101.24.3145	SA.187.2136	1	S/Hand	35.00
Technotrans water connector coupler 101.24.3140	SA.187.2146	1	New	45.00
102 combined spray and cleaning bar	S8.205.036	1	S/Hand	60.00
WashStar trough	S8.205.063S/03	1	New	300.00
SM102 TransferPlus Jacket	S8.215.201N/07	2	New	700.00
SM102 Transfer Jacket non Heidelberg	TVSH-510-A	1	New	450.00
Hose clamp	S9.014.807	4	New	2.00
SM102 refined perfecting jacket PP1354 slight damage	S9.581.173	1	New	650.00
MO pincer bar reconditioned		1	S/Hand	3000.00
SORM Delivery Trolley		22	S/Hand	30.00
SORK Delivery Trolley		2	S/Hand	30.00
CD102 format smoother		1	S/Hand	10.00
CD102 smoother		1	New	20.00
102 delivery side jogger plate		1	New	55.00
Blanket measuring device electronic (digiblanket)		1	New	600.00
SM102 Quick action plate clamp adjusting screw		4	New	5.00
Feeder chain 1/2" x 5/16		5	New	3.00
GTO52 CPC duct roller plasma coated	69.008.001	1	New	650.00
GTO52 lever operated ink duct	69.008.300	2	S/Hand	1250.00
GTO52 fount solution pan		2	S/Hand	70.00
GTO52 set of parts to convert single col press back to conventional		1	S/Hand	350.00
Timing Belt T2.5 230 x 4		3	New	4.00
Timing Belt T5 200 x 10		5	New	8.00
Timing Belt T5 210 x 8		6	New	8.00
Timing Belt T5 254 x 6 (Trans-flex Classic ST1628)		4	New	8.00
Timing Belt T5 455 x 10		4	New	12.00
Timing Belt T5 720 x 10		1	New	12.00
Timing Belt 187-L-050		1	New	12.00
Timing Belt 25T5/940DL double timing belt		1	New	35.00
Speedmaster gripper setting set		1	S/Hand	350.00
Ball bearing 6005 2RS		5	New	8.00
Oil Banjo fittings for delivery chains		5	New	1.00
T Platen 10 x 15 chase		4	S/Hand	35.00
Cam follower F-51380.1 30x12x29		4	New	40.00
Grey hole plug 10mm	x	13	New	0.50
Hose Reinforced PVC 12.5mm		60	New	2.00
Hose Reinforced PVC 13mm x 19mm		30	New	2.00
Hose Reinforced 20mm		4	New	5.00
Ink temp hose 800mm (830mm full length)		2	New	45.00
Filter Regulator 1/4BSP		2	New	30.00
GTO52 Offset sheet smoother pair left/right		1	S/Hand	20.00
Flat Belt (SG250) 3/4 x 147	FG.0000-S28-0290	2	New	11.50
Flat Belt Alpha 500HD	SU22.22.00125	2	New	50.00
Feed Tape 1365 x 20	2144-98-01-00	1	New	15.00
Knurled Screw M6 x 18	200-070-02-00	2	New	2.50
Pan Head Screw M4x2.5-5.8	200-556-04-00	1	New	1.00
Pan Head Screw M4x2.5x4-5.8	200-556-05-00	2	New	1.00
Stahl belt 9.5 x 723 SPZ	200-594-02-00	1	New	11.00
Narrow V-Belt SPZ 1262 -LW	200-594-57-00	3	New	9.00
Spacer Ring 6.1 x 12 x 29.5	201-303-33-00	5	New	1.00
Washers and Bolt 6.4-ST-SW	201-390-03-00	1	New	1.50
Poly V-Belt 400 J8	201-463-01-00	1	New	13.50
Stahl belt 28 x 700	208-450-01-00	1	New	15.00
Stahl fold plate dial gauge	239-545-01-00	1	New	35.00
Stahl Electric Lifting Magnet	203-764-01-00	1	New	200.00
Round Belt Polycord R4x966	201-890-13-00	5	New	15.00
Round Belt Polycord R4x780	201-890-17-00	5	New	15.00
Narrow V-belt XPZ 1187	225-932-01-00	1	New	15.00
Toothed Belt D600 H100	235-373-01-00	1	New	35.00
Brecoflex 16AT5/1500 PAZ DL	243-409-01-00	1	New	52.00
Plug-Type Hose Coupling MCR 24 S A-G 10381600	245-556-01-00	1	New	8.00
Plug-Type Hose Coupling MCB3CM 10382100	245-557-01-00	10	New	0.70
Plug-Type Hose Coupling MCS3CM 10382000	245-558-01-00	10	New	0.70
Plug-Type Hose Coupling MCB5CM 10382300	245-559-01-00	10	New	0.70
Plug-Type Hose Coupling MCS5CM 10382200	245-560-01-00	10	New	0.70
Knockout Perf Stripper Stahl TD Series 35mm Shaft		3	New	15.00
Polar Pump Pulley Shim	230068	2	New	2.00
Polar Pump Pulley Shim	240788	2	New	2.00
NTN 6005LU Bearing with Square 13mm ID spindle		1	New	12.50
Trifold Creaser Delux Spare holder (no rubber ring)		1	S/hand	45.00
JustFeed Universal envelope feeder		1	S/Hand	800.00
Mounting rail T-10 clip for Pneumatic hoses		8	New	1.00
MANRoland hydrometer		0	New	90.00
Drive End Flange SM102 Pan roller New style (from 2005)		1	New	35.00
Ball bearing 6011		1	New	30.00
Connector Cap (Dust Cover), For D-Sub Connectors, Male & Female		23		0.60
M10x15 thread handle 130mm total length		1	New	15.00
Type high letterpress ink roller setting tool		1	S/Hand	20.00
Royce Spacesaver bottle bung		1	New	15.00
Complete damping unit QM46 unit 2		1	S/Hand	1500.00
GTO 46 speedclamp single colour front		1	S/Hand	350.00
102/74 Autoplate setting distance bushes (various sizes)		7	S/Hand	1.00
T handle wrench 8mm x 350		1	New	25.00
T handle wrench 4mm x 350		1	New	20.00
T handle wrench 17mm x 540		1	S/Hand	22.00
Komori nylon damper gear 62 dia		4	New	15.00
Komori nylon damper gear with brass insert 75 dia		1	New	25.00
Komori oil filter F-100 (CP-175H)	3Z0-2600-341	1	New	56.00
Komori suction filter S-150 (CS-132W)	3Z0-2600-351	1	New	45.00
Muller Martini brackets	0351.7987.4	6	New	25.00
Varn form damp gear	095522	1	S/Hand	25.00
Numbering and Perforating
GTO forward convex box Ex stock Leibinger		7	New	350.00
GTO backward convex box Ex stock Leibinger		4	New	350.00
GTO backward straight box Ex stock Leibinger	£361.10 15/2/19	3	New	295.00
GTO forward convex LEDA (no sink 0)		1	S/Hand	70.00
GTO forward convex		26	S/Hand	99.00
GTO forward convex good condition		12	S/Hand	145.00
GTO/Fuji forward convex sprung return good condition		2	S/Hand	170.00
GTO forward convex good condition Press Parts		1	S/Hand	120.00
GTO forward convex suffix 180 degrees		2	S/Hand	125.00
GTO backward convex suffix 180 degrees		2	New	200.00
GTO backward convex suffix 180 degrees		1	S/Hand	125.00
GTO/Fuji backward convex sprung return good condition		1	S/Hand	180.00
GTO forward convex skip 4 (1 set)		1	S/Hand	400.00
GTO backward convex 3mm gothic good condition		5	S/Hand	220.00
GTO forward straight		40	S/Hand	99.00
GTO forward straight good condition		5	S/Hand	135.00
GTO forward straight 5 digit wide spacing		1	S/Hand	125.00
GTO forward straight (chinese made)		2	New	95.00
GTO/Fuji forward straight spring return		1	S/Hand	125.00
GTO forward straight 9 digit		2	S/Hand	150.00
GTO forward straight skip 2 evens		1	S/Hand	115.00
GTO forward straight skip 2 odds		1	S/Hand	115.00
GTO backward straight 9 digit good cond book + page		6	S/Hand	180.00
GTO backward straight 50 to 0 and repeat		4	S/Hand	240.00
GTO backward straight Chinese		2	S/Hand	95.00
GTO backward straight good condition Press Parts		0	S/Hand	110.00
GTO backward straight		0	S/Hand	105.00
GTO backward straight good condition		1	S/Hand	135.00
GTO backward straight 7 wheel 3.5mm gothic		2	S/Hand	150.00
GTO backward straight 9 wheel 3mm gothic good condition		8	S/Hand	250.00
GTO backward straight 10 wheel OCR-A1 (machine readable)		2	S/Hand	200.00
Skip 2 forward convex set GTO		2	New	98.00
Skip 2 forward convex set GTO		1	S/Hand	45.00
Skip 3 forward convex set GTO		1	S/Hand	55.00
Skip 4 forward convex set GTO		3	S/Hand	60.00
Skip 8 forward convex set GTO		3	S/Hand	130.00
Skip 5 forward convex set MO		1	S/Hand	90.00
Skip 2 forward convex set Ryobi 18.9		1	New	98.00
Skip 2 backward convex set GTO		2	New	98.00
Skip 4 backward convex set GTO		1	S/Hand	100.00
Skip 2 forward Straight Set		5	New	80.00
Skip 3 forward straight set		1	New	105.00
Skip 2 backward straight set		1	New	80.00
Skip 3 backward straight set ( 3 wheels)		2	New	123.97
Skip 4 backward straight set ( 4 wheels)		1	New	120.00
9 Digit Box Convex Operating Arms		4	New	34.00
Straight box letter wheels A-J,K-R,S-Z (3)		10	S/Hand	25.00
Convex GTO No7 letter wheel A-J,S-Z		2	S/Hand	25.00
Convex 17" No7 letter wheel S-Z		1	S/Hand	25.00
Repeat wheel (triplicate)		2	New	35.00
PM/QM46 Numbering Unit complete		1	S/Hand	1000.00
PM/QM46 Numbering duct end block	A1.431.031	2	S/Hand	15.00
PM46 Perforating shaft	A1.731.101	1	S/Hand	300.00
PM46 Perf holder grub screw	A1.731.107	1	New	8.00
PM46 Perf holder	A1.731.115	2	S/Hand	98.00
PM46 Numbering mounting ring	A1.433.301	1	S/Hand	200.00
PM46 Numbering Cam RH	A1.433.303	2	New	390.00
PM46 Numbering Cam LH	A!.433.302	1	New	390.00
PM46 Numbering Cam RH	A1.433.303	1	S/Hand	280.00
GTO46 Numbering unit complete		1	S/Hand	800.00
GTO52 Numbering unit complete		2	S/Hand	1500.00
GTO Numbering imprint block holder	331-423	6	S/Hand	5.00
GTO Numbering imprint block holder	330-423	6	S/Hand	5.00
GTO Numbering imprint block holder	332-423	1	New	10.00
GTO Numbering imprint block magnetic holder	337-423	1	New	45.00
Adapter design B for flatbase numbering 17"		1	S/Hand	35.00
Prefix straight box interchangable slide holder		1	S/Hand	20.00
GTO46 Mounting ring	42.431.310	1	S/Hand	80.00
GTO52 mounting ring 310-421	69.431.310	6	S/Hand	80.00
GTO52 special mounting ring	69.431.312	2	S/Hand	120.00
GTO52 locking ring	69.431.318	1	S/Hand	30.00
GTO46 Numbering cam L/H	42.431.320	2	S/Hand	100.00
GTO46 Numbering cam R/H	42.431.321	3	S/Hand	115.00
GTO52 Numbering cam L/H	69.431.320	20	S/Hand	98.00
GTO52 Numbering cam L/H	69.431.320	8	New	230.00
GTO52 Numbering cam R/H	69.431.321	4	S/Hand	130.00
GTO52 Numbering cam R/H	69.431.321	1	New	260.00
GTO52 Numbering cam double side	69.431.322	3	S/Hand	250.00
GTO52 special numbering cam Leibinger 0-75-053-00	69.431.328	1	S/Hand	80.00
GTO52S Numbering cam L/H	89.431.320	2	S/Hand	120.00
Herben Magnacam GTO		1	S/Hand	125.00
GTO 52 Support Bar	69.731.025	1	S/Hand	50.00
Perf arm T wrench	42.731.010	2	S/Hand	8.00
GTO Angle piece DS	42.731.028	0	S/Hand	50.00
GTO Perforating arm	42.731.040F	13	S/Hand	175.00
GTO Perforating arm	42.731.040F	5	S/Hand	175.00
GTO Perforating arm	42.731.040F	1	New	400.00
GPE Perforating head		2	S/Hand	150.00
GTO46 old style perforating set		1	S/Hand	25.00
SM52 Numbering unit complete MV.028.404	G2.431.100	1	New	4500.00
SM52 Mounting ring damaged	G2.431.310	1	S/Hand	100.00
GTO inter unit perforating arm	42.731.006F	1	S/Hand	120.00
GTO inter unit perforating arm	42.731.006F	1	New	200.00
10 tpi perforating wheel		7	New	13.50
7 tpi 2mm gap wheel		2	S/Hand	8.00
GTO52 Printmaster special perforating arm - MV.021.997	69.731.040F	4	New	550.00
SM52/GTO52 cross perf mounting bar/clamp/	G2.732.010F	1	New	700.00
MO numbering ink fountain divider	43.431.115	23	S/Hand	5.00
MO backward convex good condition		15	S/Hand	250.00
MO backward convex		2	New	320.00
MO backward convex		3	S/Hand	119.00
MO backward convex chinese		6	S/Hand	80.00
MO forward convex good condition		7	S/Hand	250.00
MO forward convex		2	New	300.00
MO forward convex		8	S/Hand	160.00
MO backward 30-1 repeat straight good cond		1	New	120.00
MO forward straight		10	S/Hand	150.00
MO forward straight good condition	43.431.302	6	S/Hand	200.00
MO Numbering forward straight OCR-B1		13	New	80.00
MO Numbering backward straight OCR-B1		15	New	80.00
MO Numbering backward straight OCR-A1		24	New	80.00
MO Numbering imprint block holders	330-523	4	S/Hand	5.00
MO Mounting ring	43.431.310	1	S/Hand	145.00
MO Numbering Cam LH (320-522LH)	43.431.320	6	S/Hand	170.00
MO Numbering Cam LH (320-522LH)	43.431.320	3	New	230.00
MO Numbering Cam RH (321-522RH)	43.431.321	3	S/Hand	90.00
MO Perforating arm	43.431.040F	9	S/Hand	260.00
MO Special perforating arm	43.731.050F	1	S/Hand	280.00
SM74 perforating cross bar with brackets	M2.731.101	1	S/Hand	250.00
SM74 Perforating arm	M2.731.102F	3	S/Hand	300.00
SM74 Numbering cam RH	M2.431.320	1	New	150.00
Ryobi 520 forward straight 21.163		2	S/Hand	110.00
Ryobi/Hamada 480/500 forward convex 18.9		3	S/Hand	120.00
Ryobi/Hamada 480/500 forward convex 18.9		4	New	200.00
Ryobi/Hamada 480/500 backward convex 18.9		2	New	200.00
Hamada forward convex 17"		1	S/Hand	140.00
Morgana forward straight 16.7" Leibinger		1	New	295.00
Morgana forward straight 16.7"		1	S/Hand	130.00
Morgana backward straight 16.7"		5	S/Hand	130.00
Sakurai Forward Convex 25.9" good condition		2	S/Hand	140.00
Sakurai Backward Straight 26" good condition		4	S/Hand	140.00
Sakurai Backward Straight 25.9"		1	New	220.00
Forward Convex 24"		1	S/Hand	140.00
Backward Straight 24"		1	S/Hand	140.00
TECHNOTRANS SPARES
Technotrans Alcosmart 10010815 AZR 15 pin	87.187.2584	1	New	2300.00
Technotrans Alcosmart R 101.01.5002 9 pin		1	S/Hand	500.00
Technotrans locking pin	47130012	1	New	8.00
Inkline print head 951.47.1532	C5.196.0232	4	New	45.00
Technotrans inkline sealing ring PP6097	951.47.1609	12	New	7.50
Inkliner wire stirrer SM102	951.27.2715	10	New	25.00
Ejector basic element open	153.47.2875	4	New	14.00
Ejector basic element closed	153.47.2876	3	New	14.00
Ejector bypass	153.47.2877	1	New	14.00
TRE40 display	420294505	1	New	2500.00
Beta Tecon unit TDC31 reconditioned 430244301	L2.187.2396	1	S/Hand	980.00
Electronic board TBC42.1 reconditioned	420.29.4519	1	S/Hand	200.00
Washstar display	C2.196.1526	1	New	1200.00
Ink	27.03.06PL	1	S/Hand
Husky Pump 205 PDG K3		2	New	335.00
Filter FD900 Eco efficiency	1031272007	1	New	150.00
Inline water filter	GS-210DI	1	New	12.00
Inline water filter	065155109	1	New	98.00
Connector	063502021	1	New	45.00
Expansion valve	58450961	1	New	60.00
Alcosmart recalibration kit	G5.16.1529	2	New	40.00
Alcosmart recalibration kit	G5.16.1529	1	S/Hand	20.00
Solenoid valve G1/2"	056501221	2	New	150.00
Dosatron D25RE10		0	New	400.00
RO Membrane (pair)	ESPA1-2521	1	New	300.00
Filter housing 20" G1BSP		1	New	55.00
Filter housing 10" G1/4BSP		3	New	25.00
Filter housing with bleed valve 10" G1/4BSP		1	New	30.00
Inline filter and valve for FKC2		1	New	20.00
Nozzle	153472869	5	New	8.00
Diffuser	153472871	8	New	8.00
Solenoid Valve	056504826	1	New	450.00
Inline flow switch		1	New	150.00
Inline flow switch		1	S/Hand	70.00
Circulation pump refurbished KTE141-200-652ZX+06   0402052978	4020529781	1	S/Hand	600.00
Circulation pump refurbished KTF 48/170-QC-X+190     057010850	106017487	1	S/Hand	400.00
Circulation pump refurbished KTB 52/300-QC-X+601     057010077	102050466	1	S/Hand	400.00
Flow valve for KTF/KTB immersion pump		2	New	20.00
SM52/PM74 Alcohol stabiliser refurbished CC 2.5 101.21.2500	G5.196.1506	1	S/Hand	800.00
SM52 Alcohol stabiliser 101.21.2230	G4.196.1506	1	S/Hand	500.00
SM102/74 Alcohol stabiliser 101.21.4680	87.187.2176/02	1	S/Hand	500.00
Ejector Block control unit	101.21.3162	1	S/Hand	85.00
Solenoid valve	6-211-107-21	1	S/Hand	30.00
Solenoid valve IMI Norgren Buschjost	8498297.9136	1	New	40.00
Solenoid valve for SM52 alcohol stabiliser Alcosmart R	9-211D-07-26	1	New	65.00
Inkline control panel refurbished	951.49.4223	1	S/Hand	80.00
Inkline control panel	27.03.06PL	1	S/Hand	50.00
Burst hose sensor for Alpha V		2	New	140.00
Lubron Total Hardness tester		2	New	15.00
Pressure switch	065.07.1000	1	New	18.00
RO Pump 900lt/hr	405217	1	New	745.00
Pump motor RO Alpha R20 (untested)	057080027	1	S/Hand	60.00
Pump motor RO unspecified 240v		1	S/Hand	60.00
ELECTRICAL
MBO sensor	#0131500	1	New	45.00
Clamp	00.580.4506	1	New	28.00
Pile jog microswitch in feeder head	00.780.0280	2	New	38.00
Pile jog microswitch casing	00.780.0287	1	New	2.00
Weko spray powder magnet complete (PP493)	00.780.0851	1	New	220.00
Emergency stop button old style	00.780.1318	4	New	25.00
Filament lamp 24v 2w	00.780.1475	6	New	1.50
NNR2 control	00.780.3409	1	S/Hand	40.00
Small Festo plug 14098 MSSD-E	00.780.3910	5	New	5.00
Printed circuit board (EAK)	00.781.2192/A	1	S/Hand	200.00
Trip switch	00.783.0111	1	New	55.00
Sidelay sensor SMCD102/SM74/52/QM46DI	00.783.0388/A	13	New	190.00
102/105 sensor	00.783.0574	1	New	60.00
SM102 oil distributor sensor	00.783.0624	2	New	115.00
Receiver board 19" monitor recon exchange	00.783.0992	1	S/Hand	600.00
PM46 ZTK board	00.785.0156	1	New	650.00
PM46 ZTK board A1.144.9114	00.785.0156	1	S/Hand	200.00
SCUB board	00.785.0725	10	New	189.00
Delivery display module KID2	00.785.1272/01	1	New	1500.00
Gretag scanner lamp	34.30.83-1	1	S/Hand	50.00
SM102 carbon brush 10x16x40	61.101.2012	6	New	30.00
Coater and Alcolor drive motor	61.105.3944	1	New	1600.00
102 Lost sheet sensor	61.110.1321/03/A	1	New	230.00
SM/CD102 varnish sensor	61.110.1342	1	New	110.00
Magnetic sensor	61.110.1651	1	S/Hand	65.00
Chopper sensor	61.110.1671	1	New	185.00
Cabinet fan reconditioned exchange	61.115.2401	1	S/Hand	415.00
102/74/52 Wash fluid container sensor	61.127.1331/A	1	New	175.00
102/74/52 Wash fluid container sensor	61.127.1371	2	New	220.00
Spray powder/gripper bite exchange	61.144.1111	3	S/Hand	160.00
Servo gearbox gold label	61.144.1121	2	New	540.00
Servo gearbox red label	61.144.1141/01	5	New	420.00
Servo gearbox orange label	61.144.1151	5	New	300.00
Coating pan sensor (older prong type)	61.148.1312	1	New	110.00
Duct key motor	61.186.5311	7	New	130.00
Duct key motor late with tacho	61.186.5511	8	New	115.00
102 damping level sensor 22mm	61.198.1553	1	New	110.00
QM46DI/GTO/SM74 encoder	63.101.1211	1	New	350.00
MO damper motor recon exchange	63.178.1153	1	S/Hand	995.00
SM72/SORM Eltex Anti static bar	68.118.1323	1	New	350.00
PM52GTO Power supply stabilised 24v	69.146.9122	1	S/Hand	320.00
ECO alcohol unit	69.196.1621	1	New	190.00
Servo gearbox silver label	71.112.1311	1	New	350.00
CPC Button (old type solder wires) square	71.186.3631	12	New	34.00
CPC Button (old type solder wires) square	71.186.3631	2	S/Hand	10.00
CPC Duct sweep motor EXCHANGE old one required	71.186.5121	2	New	650.00
72/102 circumferential register motor	71.186.5141	1	New	310.00
Potentiometer for register system	71.186.5172	6	New	30.00
Duct key motor planatery gear	71.186.5311	4	New	90.00
Duct key motor	71.186.5311E	5	New	100.00
Duct key motor	71.186.5311E	1	S/Hand	40.00
Servo 60rpm recon exchange (PP408)	81.112.1311	1	New	290.00
CPC Button (old type solder wires) square gold	81.186.3635	4	New	34.00
CPC Button (old type solder wires) square gold	81.186.3635	1	S/Hand	20.00
CPC Button (old type solder wires) rectangular green	81.186.3665	4	New	34.00
Pushbutton green rectangle	81.186.3815	1	New	13.00
Pushbutton yellow rectangle	81.186.3825	2	New	13.00
Pushbutton red rectangle	81.186.3835	2	New	13.00
Pushbutton no lens rectangle	f	3	S/Hand	5.00
Pushbutton white square	81.186.3855	9	New	12.00
Pushbutton white square (older style with screw fixing)	81.186.3855	3	New	15.00
SM102/72 circumferential motor exchange	81.186.5141	1	New	390.00
CPC Flashcard	81.186.5276	5	S/Hand	40.00
QM46DI/GTO52S Durr Compressor	89.102.1902	1	S/Hand	800.00
SM102/XL105 servo drive phase displacement	91.105.1171	5	New	550.00
Connecting cable	91.110.144	1	New	95.00
Delivery height sensor	91.110.1310	2	New	350.00
SM/CD102 Lay area lamp complete OS	91.117.1302	1	New	105.00
SM102 Eltex anti-static bar R22 7metres cable	91.118.1333	1	New	550.00
Contactor 3TF4311-OBB4	91.144.3252	1	New	55.00
Limit switch AT0-11-S-I	91.145.1141	2	New	20.00
SM102 control station	91.146.9213	1	New	170.00
Rectangle signal lamp	91.150.1351	1	S/Hand	6.00
Air pressure switch	92.102.1931	1	New	85.00
Lay Magnet	93.111.031	1	New	190.00
Lay Magnet coil only	93.111.031	1	New	80.00
SM52 feeder blower recon exchange (motor only)	98.179.1191	1	S/Hand	250.00
SM52 feeder blower recon exchange	98.179.1191	1	S/Hand	400.00
Reischle KTL15 (13) compressor reconditioned exchange	A1.102.1401	1	S/Hand	850.00
Emergency stop switch contact for PCB mount	A1.144.9130	1	New	12.00
QM46 Delivery static bar and brackets	A1.118.1332	1	S/Hand	175.00
QM46 Feeder static bar and brackets	A1.118.1322	1	S/Hand	175.00
Brake encoder	C2.101.3013/02	2	New	550.00
Motor encoder	C2.101.3015	2	New	550.00
Axial Fan 80 x 25	C2.115.1421	1	New	53.00
Suction brush motor	C2.163.1401	1	S/Hand	780.00
Feeder air regulating valve	C5.016.560	1	New	750.00
Inkline sensor 951.49.4204	C5.196.0221	3	New	640.00
Inkline sensor 951.49.4205	C5.196.0324	1	S/Hand	360.00
Grease Tank sensor	C6.302.302	1	New	440.00
102 IR radial blower exchange	C7.170.0701/07	3	New	1300.00
Contactor Siemens 3RT1016-1BB41	C7.170.0589	1	S/Hand	25.00
Encoder 5v 65536 Imp	CP.110.2571	1	New	275.00
CP2000 light pen	CP.150.5556	1	New	350.00
CP2000 light pen	CP.150.5556	3	S/Hand	200.00
Touch monitor 19" recon exchange	CP.158.5438	1	S/Hand	1900.00
CPC42 Autoregister module	CP.186.0051	2	New	300.00
CPC24 White reference element tape	CP.186.2428	1	New	15.00
Prinect board PEK	CP.186.6119	1	S/Hand	150.00
Prinect electronic unit VVK	CP.186.6129	1	S/Hand	150.00
Prinect board CVK	CP.186.6139	1	S/Hand	185.00
XL105 feeder drive clutch complete	F2.016.130	1	New	4000.00
XL105/SM102 register servo	F2.105.1171	2	New	650.00
SX/CD102 servo blue label recon exchange	F2.105.1211	1	S/Hand	135.00
XL105 Servo Drive	F2.105.1231	2	New	560.00
XL105 Servo Drive recon exchange	F2.105.1231	1	S/Hand	350.00
XL105/6 Ink duct roller servo reconditioned exchange	F2.105.1263	1	S/Hand	2500.00
XL106/5/SX102 sheetbrake motor recon exchange	F2.105.1264	0	S/Hand	1500.00
Delivery fan potentiometer	F2.105.1271	1	New	270.00
XL105 blanket wash sensor	F2.110.1321	1	New	110.00
102/105 side lay sensor	F2.110.1461	1	New	450.00
XL front lay eye	F2.110.1462	13	New	260.00
SM/CD102 sheet slowdown position servo blue/silver	F2.112.1311	7	New	320.00
CD74 Floating guide fan	F2.115.2461	1	New	230.00
Eltex Ionising blower head	F2.118.1318	1	New	550.00
102/105 Connecting line for sheet brake motor	F2.147.7025	1	New	950.00
CD74 Ametek air distributor complete now PP7065	F2.179.2011/05	1	New	780.00
105/102 sheet jogger motor exchange	F4.105.1231	0	New	450.00
XL105/SM/CD102 Servo drive yellow label exchange	F4.144.1141	7	New	310.00
XL105/SM/CD102 Servo drive yellow/silver label exchange	F4.144.1151	7	New	300.00
Sensor bank	F6.110.1020	1	S/Hand	450.00
anti-rotation washer	G2.090.9071	1	New	1.50
SM52 Durr compressor exchange	G2.102.1901	1	New	3100.00
SM74 front lay sensor	G2.110.1461	2	S/Hand	300.00
Encoder exchange	G2.110.2571	1	S/Hand	100.00
Encoder SM52/74/102/QM46 exchange	G2.110.2571	1	New	350.00
SM52 servo sidelay pink label exchange (PP7100)	G2.144.1141/01	4	New	390.00
SM52 Ink fountain roller drive motor recon exchange	G2.144.5011	2	S/Hand	800.00
SM52 damper motor recon exchange	G2.144.5012	1	S/Hand	800.00
SM52 double sheet detector	G2.161.1531	0	New	115.00
Electrical filter for Ametek	G2.179.1511	1	S/Hand	35.00
Blower SM52/74 Feeder	G2.179.1911	1	New	610.00
Servo gearbox orange/silver	L2.105.1311	1	New	225.00
CD74 water sensor (PP7030)	L2.110.1563	1	New	150.00
Servo gearbox green/silver reconditioned exchange	L4.105.1311	0	S/Hand	198.00
XL75 suction head adjust exchange	L4.105.1151	15	New	98.00
Spray powder heater	L4.164.1458	1	New	120.00
Pressure switch for Technotrans	L4.187.2158	1	New	65.00
Contactor 3RT1025-1B 7.5kW	L6.170.0973	1	New	140.00
SX74 damper motor recon exchange	M2.105.3061/62			1450.00
SM74 blowdown fan	M2.115.2411	1	New	160.00
SM74 Eltex ionising blower	M2.118.1308/03	1	New	500.00
Ioniser power unit	M2.118.1313	1	New	250.00
SM74 Eltex feeder ionising bar set MV.026.358	M2.118.1333	1	New	450.00
Power supply NTM	M2.144.2031	1	S/Hand	450.00
Power supply KLM4 recon exchange 00.779.2192	M2.144.2111	1	S/Hand	2500.00
ZSK Prinect control board	M2.144.5010	1	S/Hand	850.00
LTM100 Power board	M2.144 5401/02	1	S/Hand	350.00
Inter unit control station recon	M2.146.9206	2	S/Hand	60.00
SM74 Inter unit control station	M2.146.9206	1	New	280.00
SX102 crank switch	M2.147.1941	2	New	52.00
Momentary contact switches	M2.147.7331/03	1	New	95.00
SM74 Lay shaft potentiometer OS	M2.165.1651	1	New	75.00
SM74 Lay shaft potentiometer DS	M2.165.1661	1	New	75.00
74/52 damping pan sensor	M2.198.1563/06	12	New	160.00
SM74 feeder coupling	M3.109.1311/03C	4	New	980.00
SM74 feeder coupling reconditioned	M3.109.1311/03C	1	S/Hand	480.00
Servo gearbox green label	M3.148.1311	1	New	220.00
Servo gearbox red label 60rpm recon exchange	M4.112.1311	2	S/Hand	230.00
SM74 pile alignment connecting line	M4.147.0043	1	New	35.00
SM74 slowdown motor with coupling (exchange) 24 volt	M5.105.0311	3	New	2250.00
SM74 Eltex delivery ionising bar	M6.118.1326	1	New	560.00
Connecting line DBK modular M6.145.1120 ?	M6.145.1121	1	New	40.00
damping level sensor	MV.031.049/05	1	New	120.00
XL105/SM102 magnetic feeder coupling	SA.109.1131	3	New	950.00
Technotrans InkLiner 951.01.8005	V8.601.013	4	S/Hand	850.00
Metal casing for microswitch		2	New	8.00
Terminal cover for Baumuller damper motor		2	New	15.00
Contactor Siemens 3TH40 22-0AP0		5	New	55.00
Auxilliary contact Siemens 3RH1911-1HA22		3	New	33.00
Auxilliary contact Siemens 3RH1911-1FC22		1	New	33.00
Auxilliary contact Siemens 3RH1911-1FA22		1	New	33.00
Auxilliary contact Siemens 3RH1921-1FA22		1	New	33.00
Motor circuit breaker Siemens 3RV1011-0KA10		1	New	60.00
Motor circuit breaker Siemens 3RV1011-1KA10		1	S/Hand	30.00
Motor brush 2359 pairs 22x6.3x30		8	New	5.00
Motor brush 4350 10x20x32		10	New	5.00
Motor brush BG401 19x8x28	00.780.2128	48	New	5.00
Motor brush UG12 6.2x22x30 pairs		4	New	8.00
Motor brush 2338 10x20x25		12	New	5.00
Motor brush GTO 8x16x32		2	New	8.00
Slip ring brush 12.5x6x20		6	New	5.00
Fuse 100amp		2	New	54.00
Motor brush 2420 2H01 12.5x25x32		18	New	8.00
Compressor Vane set Becker KDT2.14/3.14 (4 blades)	901334 00004	1	New	120.00
Compressor Vane set Becker DVT2.14/3.14 (7 blades)	901334 00007	1	New	250.00
Compressor Vane set Becker DTLF 200-360 (5 blades)	901367 01005	2	New	200.00
EKC board		1	S/Hand	30.00
Technotrans limit switch	951474185	3	New	45.00
Technotrans inkline control panel	951494200	1	New	160.00
Rietschle CLFT 61DV		1	S/Hand
Rietschle CLFT 40DV		1	S/Hand
Becker D3.40 DSK		1	S/Hand
Ametek Windjammer 119156-54		1	New	550.00
IR lamp 1000w X clip Komori		22	New	50.00
UV lamp IST 39476	T-753-K2H 45	2	New	250.00
UV lamp Primarc 7800070 535058 CD74		1	New	350.00
GTO power neon lamp	LGL/220/B neon	2	New	5.00
Roland light barrier	10028492	1	New	60.00		Welcome to the Press Parts clearance list, this list can be searched via Heidelberg part number or description.
Piller drier part	2520896	1	New	30.00
Densitometer Gretag Macbeth D19C		1	S/Hand	300.00
Densitometer Xrite DensiEye 100 E/P/L		1	S/Hand	500.00		To run a search just use the built in search function, ctrl+f on a PC or CMD+f on MAC
Centurfax CC Dot Quality control system		1	S/Hand	500.00
LCD screen Sharp LQ10D367 (Polar 92E guillotine)	043 063	1	New	140.00
Stahl TA52 Touch screen membrane	AMT9509A	1	New	400.00		If you need any assistance at all, or to place an order for any of these parts contact us via Email:
Roland ebmpapst fan	8C37M5162251	2	New	60.00
Roland ebmpapst fan	8C37M5163351	1	New	60.00
Habasit PQ-18 Polycord heating tool		1	S/Hand	30.00		[email protected] or on Phone: +44 (0)20 8502 3059
Siemens switch roller old style (orange)	3SX3 102	1	New	28.00
Motor for Oxy Dry 1704		1	New	320.00
Harting Han 6 pin 35A (3x2) Heavy Duty Power Connector with hood		1	New	75.00
Harting Han DD 24M Heavy Duty Power Connector with hood and pins		1	New	80.00
10 pin 16A 380V Heavy Duty Power Connector with hood and clamp	210-917-0100	1	New	40.00
Rollers
QM/PM46 Rilsan distributor	A1.009.175	2	S/Hand	120.00
T-Offset (TOK) Rilsan covered roller 42.5 x 272 reconditioned		1	S/hand	75.00
GTO46 Red		1	New	20.00
GTO52 yellow Allmake Ultrachem		1	New	20.00
GTO52 blue Allmake Ultrachem		0	New	20.00
GTO52 white Allmake Ultrachem		1	New	20.00
GTO52 red Allmake Ultrachem		0	New	20.00
GTO52 damp 46mm		1	New	20.00
GTO52 Blue indian		0	New	20.00
GTO DDS link roller (older style)	69.030.408	2	S/Hand	130.00
GTO DDS distributor	69.030.401	3	S/Hand	120.00
GTO Rilsan in rider pre 1989 with long shaft 655mm exchange	69.009.022	1	S/Hand	170.00
GTO46 yellow ink (Sauer)		1	New	45.00
GTO46 damp Allmake Ultrachem		1	New	20.00
GTO46 damping pan roller	42.030.370	3	S/Hand	70.00
GTO52 damping pan roller	69.030.370	1	S/Hand	70.00
GTO52 Varn oscillator spiral mechanism recon		0	New	120.00
SM52 Pan by Westland (German Saphira)	G2.030.340	1	S/Hand	70.00
SM52 damp (slight marks)		1	New	50.00
MO Rilsan transfer 54mm	43.009.022F	1	New	220.00
MO Rilsan ink intermediate early style	43.009.911	1	S/Hand	150.00
MO Damping distributor bright chrome recon flat end type	43.009.020	1	S/Hand	300.00
MO Damping distributor bright chrome recon recessed end type	43.009.020	1	New
MO Alcolor damping distributor with 22mm journal bore	63.030.540	1	New	380.00
MO Blanket wash		1	New	100.00
MO red Allmake Ultrachem		1	New	40.00
MO yellow Allmake Ultrachem		1	New	40.00
MO blue Allmake Ultrachem		1	New	40.00
MO white Allmake Ultrachem		1	New	40.00
MO Alcolor pan Allmake Ultrachem		3	New	100.00
MO Alcolor pan Press Parts	R0506	1	S/Hand	50.00
SM72 Damping ductor for 3M Ductor sleeve		1	New	90.00
72/SORM Damping pan roller ductor system	68.030.070	1	S/Hand	120.00
SM72 Pan Allmake		3	New	120.00
SM72 Pan Allmake Ultrachem		2	New	120.00
SM72 Yellow Allmake		2	New	70.00
SM72 Yellow KV		3	New	70.00
SM72 Blue Bottcher UV combination		1	New	65.00
SM72 Red Bottcher UV combination		1	New	65.00
SM72 White KV		1	New	50.00
SM72 Blanket wash		1	New	50.00
SORM damping bareback Pacesetter		1	New	50.00
SORM damping bareback Bottcher (exchange) 0951596		1	Second	50.00
SORM damping form R2R (exchange)		2	New	50.00
SORM White inker Pacesetter 63mm		2	New	50.00
SORM Red inker Pacesetter 60.6mm		2	New	50.00
SORM Red inker Usher Walker 60.6mm		1	New	40.00
SORM rilsan distributor 85 x 745 with journals	68.009.016F	1	New	650.00
SM74 Form inker white Rotadyne (exchange)		1	New	135.00
SM74 Form inker blue by Rotadyne (exchange)		1	New	115.00
SM74 Form inker yellow by Rotadyne (exchange)		0	New	135.00
SM74 Pan roller by Rotadyne (exchange)		1	New	110.00
SM74 Pan roller Bottcher reduced alcohol exchange	0902494	4	New	172.29
SM74 pan no brand		1	New	100.00
SM74 pan Allmake Ultrachem		4	New	100.00
SM74 Damper reduced alcohol	0902488	1	New	146.46
SM74 Damper (late) reduced alcohol	0902447	1	New	118.00
SM74 pan (late) reduced alcohol	0902450	2	New	145.00
SM74 Metering chrome exchange only		0	S/Hand	450.00
CD74 Form inker Red Westland		2	New	140.00
CD74 Form inker Red Bottcher EPDM (exchange)		1	New	150.00
CD74 Form inker Blue Westland		2	New	140.00
CD74 Form inker White Westland		2	New	140.00
CD74 Form inker Yellow Westland		2	New	140.00
CD74 White transfer Bottcher EPDM exchange		1	New	100.00
CD74 Violet ductor BFS EPDM exchange		1	New	55.00
CD74 Violet ductor Westland		2	New	80.00
CD74 Damp Westland		4	New	100.00
CD74 pan Westland		2	New	100.00
SM102 Pacesetter white inker w/bearings		1	New	65.00
SM102 Pan roller for zero alcohol exchange		1	New	260.00
SM102 Pan roller for reduced alcohol exchange		1	New	160.00
SM102 Pan roller Allmake		1	New	160.00
SM102 Pan Allmake Ultrachem		1	New	160.00
SM102 Alcolor damp dual grade 375		1	New	150.00
102/SORS Damping pan roller ductor system	41.030.070	2	S/Hand	260.00
SM102 White Westland		2	New	60.00
SM102 White other		9	New	50.00
SM102 White Allmake		3	New	60.00
SM102 White Allmake Ultrachem		16	New	60.00
SM102 White Rotadyne		1	New	60.00
SM102 White Sigma		1	New	60.00
SM102 Red Allmake Ultrachem		9	New	60.00
SM102 Blue Rotodyne		1	New	70.00
SM102 Blue Sigma		1	New	70.00
SM102 Blue Allmake Ultrachem		10	New	70.00
SM102 Yellow Rotodyne		1	New	80.00
SM102 Yellow Allmake Ultrachem		15	New	70.00
SM102 Brown Ductor	71.009.061F/02	3	New	75.00
SM102 Brown Ductor		1	S/Hand	45.00
SM102 Short ductor Westland	71.009.061F/03	2	New	70.00
SM102 Short ductor Allmake		1	New	70.00
SM102 Short ductor Rotodyne		1	New	70.00
CD102 impression wash brush  Allmake	C6.204.012	1	New	200.00
CD102 >2000 impression wash brush  Press Parts	C6.204.012	5	New	250.00
Komori lithrone 28 Coating pan roller		1	New	170.00
Consumables
Blanket GTO52 barred		14	New	15.00
Blanket Vulcan 202 647ACx970AR Colorman news press		9	New	20.00
Blanket 1045 x 800 David M QL straight edge could be SM102		9	New	30.00
Blanket SM102 1050 x 840 Rollin MPR40		1	New	30.00
Blanket SM102 1050 x 840 unknown brand		1	New	20.00
Blanket 1048 x 800 SP Evolution		6	New	30.00
Blanket 1048 x 794 Hindsqaal		2	New	10.00
Blanket MO straight edge Bottcher Top 8000		2	New	18.00
SM74 Stripping Blanket Duco Superstrip		8	New	20.00
Blanket GTO52 Vulcan 202		1	New	15.00
Blanket QM/PM46 Day QLBL		11	New	12.00
Blanket QM/PM46 Perfect Dot DL		8	New	15.00
Blanket QM/PM46 Saphira Pro 200		2	New	12.00
Blanket QM/PM46 Notone		4	New	12.00
SuperBlue Base jacket SM72 slight damage	PP648	1	New	200.00
SM74 SuperBlue LT Transfer kit		1	New	70.00
SM102 SuperBlue storage nets XOS0430296		1	New	55.00
SM102 SuperBlue delivery nets XOS0457301		2	New	55.00
40" Superblue nets XF10SBNETS (Only 5 nets)		1	New	45.00
Vintage Quack purple net 20inch box 8 nets		1	New	40.00
Quack pink net 20 inch box 5 nets		3	New	30.00
GTO52 glass bead blanket		1	New	90.00
MO Jolly Green jacket		1	New	150.00
MO Jolly Green jacket		1	New	30.00
MO PrintGuard Plus special size 555mm length		1	New	150.00
MO PrintGuard Plus slight damage	PP940	1	New	150.00
GTO 52 PrintGuard Plus 413mm - Soiled	PP934	1	New	120.00
Folacoat Plus PET 1.15mm 60.5 x 74		80	New	10.00
Manilla packing 1030 x 795 0.4mm		10	New	40.00
KORD64 impression jacket second		1	New	30.00
GTO52 brass perforating jacket second	69.731.080	1	New	20.00
SM52 steel impression jacket second		2	New	10.00
Shinohara Fuji brush wheel white 7 x 32	4633	23	New	8.00
Shinohara Fuji brush wheel  white 7 x 45	4634	42	New	8.00
Shinohara Fuji brush wheel  white 7 x 45	4635	51	New	8.00
Komori/Roland brush wheel black 6 x 47	4637	49	New	8.00
Komori/Fuji separator 0.1mm	4520	34	New	0.80
Stainless steel jacket Rotaprint R37KV		1	New	30.00
CD74 Ink sink		12	New	1.50
Mailander proofing washup blade 1259mm plastic		1	New	40.00
Dominant washup blade 516/526 rubber		1	New	25.00
Fuji/Shinohara52 M/R washup blade 550mm 7 Holes		2	New	18.00
KBA SRO M/R washup blade 770mm 8 Holes		3	New	10.00
KBA SRO Plastic washup blade 770mm 8 Holes		3	New	10.00
KOR washup blade 600mm		1	New	27.00
Komori Lithrone 28 765 x 11 holes plastic Washup blades		3	New	21.00
Komori Lithrone 40 1094 x 8 holes plastic washup blades		10	New	28.00
Roland Favorit blade 800 x 8 holes washup blades		7	New	25.00
Ryobi blade 520/522 572 x 9 holes plastic washup blades		6	New	21.00
Ryobi blade 3200/3302 355mm x 6 holes plastic washup blades		8	New	13.50
Ryobi blade 3404DI 388mm x 7 oval holes plastic	5354 52 567	1	New	28.50
Ryobi blade 750 855x34x5mm x 12 oval holes plastic		4	New	28.50
Harris 1000/M200/M300 Wash up blade 1043 x 11 holes		2	New	21.00
Large paper wedge		2	S/Hand	5.00
Small paper wedge		2	S/Hand	5.00
Damper sewing needles		38	New	1.00
Red 1 Damper cover size 300 60-67mm per metre		47	New	12.00
Narrow margin quoins		53	S/Hand	12.00
Standard  quoin wedge		23	New	2.00
Standard  quoin bolt		8	S/Hand	1.00
Narrow margin register quoins		6	New	15.00
Narrow margin double quoins 4 inch		3	New	20.00
Quoin 34mm		1	S/Hand	10.00
Quoin 90mm		10	S/Hand	15.00
Quoin 150mm		6	S/Hand	20.00
Quoin 173mm		1	S/Hand	24.00
Quoin 175mm		2	S/Hand	24.00
Quoin 203mm		11	S/Hand	28.00
Quoin 210mm		1	S/Hand	28.00
Quoin 252mm		3	S/Hand	28.00
Quoin 270mm		2	S/Hand	28.00
Quoin 300mm		1	S/Hand	28.00
Galley 220 x 330		1	S/Hand	10.00
Hanna electrode rinse soln	HI 70000	11	New	10.00
Hanna buffer solution pH4.01	HI 70004P	12	New	10.00
Hanna buffer solution pH7.01	HI 70007P	12	New	10.00
Hanna conductivity solution 1413 microS/cm	HI 70031	15	New	9.00
KSL spray powder S5 22mic		1	New	35.00
KSL spray powder L3 30mic		1	New	100.00
Sontara CD74 mini rolls x 10 x13M (damaged box)		1	New	80.00
Sontara SM52 mini rolls x 24(damaged box)		2	New	6.00
F38W/840 Fluorescent tube length 1050mm		2	New	6.00
KSB cutting jacket slight damage		1	New	50.00
SM74 Ink duct foil for UV part box 57		1	New	15.00
SM74 TransferMagic Jackets (Brown surface old coating)		6	New	250.00
SM74 TransferMagic Jackets (New ceramic coating rough service)		1	New	250.00
SM52 TransferMagic Jackets (Brown surface old coating)		2	New	150.00
Sucker 38x13x0.8 Grey	66.028.402	40	New	0.12
Spanner for guillotine 36mm		2	New	15.00
Spanner for guillotine 46mm		1	New	18.00
T wrench 13mm x 500mm		7	New	20.00
FILTER16 bags for Grafix		144	New	8.00
FILTER11Tube Filter 520 x 125 for Technotrans		4	New	5.00
Pointed Grease Nipples		23	New	2.00
Ultra Life 2 Grease 400gram cart/Amber Grease		10	New	£15
SBG Bedplate 1mm/0.39 Thou thick 610 x 770 mm		2	New	35.00
Thompson Platen cutting jacket		1	New	35.00
Stitching wire 24swg part reel 1.5Kg		1	New	10.00
PPP
PPP Polyester protection foil 700x1000		8	New	40.00
PPP Steel protection plate 700x1000		2	New	105.00
PPP SM52 Base Foil 81MF11111k + Base Set 81MF21111		1	New	950.00
PPP SM74  Job foil steel bars with no job		1	New	400.00
PPP SM74 Base Foil Ali bars 81MF11050k		2	Second	600.00
PPP SM74 Base Set 81MF21052		1	New	270.00
PPP SM74 kit Ali bars (PP4007)		1	S/Hand	200.00
PPP GTO52 Base set for D system		1	New	250.00
Letterpress
Numa Model 100 JP shaft operated 6 wheel reverse 2mm engraving		2	S/Hand	80.00
Numa Model 12 8 wheel forward 2mm engraving		1	New	180.00
Numa Model 263N 1-100 forward gothic		1	New	140.00
Atlantic Zeiser model 20 ZAV 50-1 gothic		1	New	140.00
Atlantic Zeiser model 7012 7 wheel backward gothic		1	New	180.00
Atlantic Zeiser model 6 wheel backward 3mm gothic		1	New	160.00
Sunum 1-100 forward roman		3	New	140.00
Leibinger Model 34 6 wheel forward gothic		1	New	160.00
Leibinger Model 35 6 wheel backward gothic		1	New	160.00
Press Parts 4x8 backward roman 4mm		1	New	140.00
Cornerstone Model N80B 6 wheel forward gothic		1	New	80.00
Sunum Model N80B 6 wheel backward gothic		1	New	80.00
Zacares Socbox 6 wheel backward 6mm gothic		1	New	165.00
Platen 6 cast wheel Roman 3.85mm Forward		6	S/Hand	40.00
Platen 6 cast wheel Roman 3.85mm Backward		17	S/Hand	40.00
Leda 6 wheel Roman 4.5mm Backward good condition 22x43mm		1	S/Hand	60.00
Platen 6 cast wheel Roman 2.85mm Backward		2	S/Hand	50.00
Convex arm spring suffix offset pin		1	New	35.00
Convex arm spring prefix offset pin		10	New	35.00
Straight arm spring suffix		1	New	35.00
Convex reverse 18.9 set digit		1	S/Hand
Platen
Bush for flywheel	GT0102	2	New	30
Bolt	GT0322	2	New	35
Pin for 0424	GT0434	3	New	20
Lever Ink Feed Roller 01.006.018	GT0618	2	New	125
Chase Latch 02.001.008	GT1006	1	New	90
Distance Bolt	GT1141	2	New	20
Universal Joint	GT1516	2	New	120
Lever Ink Feed Roller 01.015.031	GT1531	1	New	98
Clutch stop	GT1938	1	New	20
Foil Rewind Lever	GTP 5690	5	New	25
Disc For Foil Rewind	GTP56101	3	New	20
Disc For Foil Rewind with grub screw	GTP56101	3	S/Hand	10
Tension spring 32.056.105	GTP56105	1	New	35
Bearing bolt	GTP5698	2	New	25
Distance Pin	GTS01157	2	New	15
Platen balancing spring	T0145	2	New	95
Cam Bracket	T0214	1	New	45
Adjusting Screw Side Lay 01.013.018	T0217	8	New	8
Head lay 01.002.020	T0220	1	New	20
Brass lay left	T0264F	1	New	35
Brass lay right	T0265F	1	New	35
Wick Oiler	T0320	3	New	28
Clutch Operating Cone	T0402	1	New	120
Locking Ring	T0406	5	New	24
Pin for 0440 01.004.039	T0439	6	New	8
Clutch Tongue	T0443	2	New	8
Compression spring	T0449	2	New	25
Bolt	T0451	1	New	12
Connecting link 32.004.056	T0456	1	New	40
Flywheel Washer	T0466	9	New	4
Lever for Vibrator Roller	T0618	1	New	90
Pawl  for Ratchet Wheel 02.008.007	T0807	1	New	35
Ink Supply Lever 02.008.029	T0829	1	New	110
Clamp screw	T1053	2	New	12
Gear for 1108	T1104	3	New	85
Shaft for 1101 01.011.015	T1115	1	New	45
Handle with spring and pin	T1218	3	New	35
Tripping spring 60mm	T1232	13	New	1
Tripping spring 90mm	T1233	15	New	1
Pin Carrying 1302	T1309	4	New	18
Cam Follower 01.013.011	T1311	10	New	10
Trunion for 1312	T1317	2	New	10
Trunion Treaded 1312	T1318	2	New	10
Bush for 1302	T1320	4	New	12
Hexagon Screw Fixing Gripper Ass	T1421	1	New	15
Spindle Connecting 1604/1602	T1612	2	New	15
connector for 1615	T1616	7	New	12
Spindle for 1606	T1637	1	New	10
Compression spring 01.016.046	T1646	5	New	1
Automatic Stop Lever	T1647	20	New	20
Cam Lever 01.016.049	T1649	1	New	30
Pin Screw 01.016.079	T1679	1	New	8
Air Valve Spring Lever 01.016.048	T1690	3	New	125
Spring for pump valve 01.018.019	T1819	1	New	6
Front Cover for 1809	T1845	1	New	35
Rear Cover for 1809	T1846	2	New	35
Relief Valve	T1852F	1	New	28
Shouldered Screw	T1937	3	New	6
	T1938
Clamp Screw	T2204	7	New	4
Platen Extension Spring 153mm loop to loop		4	New	10